Maxim's Himalaya Step-Down DC-DC Converters Enable Rapid Compliance of Safety Standards for Industrial Applications

MAX17572 and MAX17574 reduce power dissipation by 40% and solution size by 50%

SAN JOSE, Calif., May 17, 2017 — (PRNewswire) — System architects can now rapidly comply to international electrotechnical commission (IEC) and safety integrated level (SIL) standards to achieve long-term system reliability with the MAX17572 and MAX17574 Himalaya synchronous step-down DC-DC converters from Maxim Integrated Products, Inc. (NASDAQ: MXIM). These highly efficient converters provide a 40% reduction in power dissipation and shrink solution size by 50% compared to other solutions.

Maxim Integrated's MAX17572 and MAX17574 Himalaya Step-Down DC-DC Converters

The industrial market is digitizing at a rapid pace, all while continually improving the safety, performance, and intelligence of systems. Tasked with deploying processors from sensors to control units, designers must reduce power dissipation while managing space constraints. They are also hard-pressed with thermal challenges and meeting safety standard regulations—critical to robust long-term reliability, yet very time consuming. In addition, designers must account for high voltage transients up to 60V on a 24V or 48V bus.

With Maxim's MAX17572 and MAX17574 DC-DC converters, designers can operate 4.5-60V as well as reduce power dissipation and solution size compared to other solutions to rapidly comply with the IEC 61508 safety standard. The converters guarantee 1A and 3A operation (5V output) and are ideal for high voltage industrial applications such as sensors, programmable logic controllers (PLCs), industrial controls, distributed supply regulation, and factory/building/power grid automation. They are also applicable for battery back-up, Power-over-Ethernet (PoE), and data centers. Operating over the -40-degree Celsius to +125-degree Celsius temperature range, the MAX17572 is available in a 12-pin, 3mm x 3mm thin-DFN (TDFN) package and the MAX17574 is available in a 24-pin, 4mm X 5mm TQFN package.

Key Advantages

  • High Efficiency: Delivers >90% efficiency across 50-100% of the load current
  • Small Solution Size: Integrated MOSFETs and compensation reduce solution size; Operates at high-switching frequency with low minimum on-time
  • Ease of Use: Internal compensation addresses any output voltage and switching frequency combination without compromising bandwidth for rapid design

Commentary

  • "Industrial equipment's control power supply inputs must meet 60V input and low thermal dissipation for reliable operation and standards compliance," said Andreas Kuhn, Head of Hardware Development, Drives Chemnitz, Siemens AG. "With Maxim's Himalaya DC-DC converters, we can consistently meet our requirements for the SINAMICS Drives Family."
  • "Maxim was the first to bring synchronous rectification at 60V to the market," said Viral Vaidya, Executive Business Manager at Maxim Integrated. "Today, we continue this innovative approach by delivering 40% lower dissipation even against competing synchronous solutions."

Availability and Pricing

  • The MAX17572 and MAX17574 are available at Maxim's website and select authorized distributors
  • The MAX17572 is available for $1.83 (1000-up, FOB USA)
  • The MAX17574 is available for $2.19 (1000-up, FOB USA)
  • Evaluation kits are available for $29.73: MAX17572EVKITA#, MAX17572EVKITB#, MAX17574EVKITA#, MAX17574EVKITB#

For all products within the family of Himalaya step-down switching regulators, visit http://bit.ly/Himalaya_Step_Down_Regulators.

About Maxim Integrated
Maxim Integrated develops innovative analog and mixed-signal products and technologies to make systems smaller and smarter, with enhanced security and increased energy efficiency. We are empowering design innovation for our automotive, industrial, healthcare, mobile consumer, and cloud data center customers to deliver industry-leading solutions that help change the world. Learn more at http://www.maximintegrated.com.

Contact:

Ferda Millan


408-601-5429


Ferda.Millan@maximintegrated.com

 

Logo for Maxim Integrated Products Inc. (PRNewsFoto/Maxim Integrated Products, Inc.)

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/maxims-himalaya-step-down-dc-dc-converters-enable-rapid-compliance-of-safety-standards-for-industrial-applications-300458906.html

SOURCE Maxim Integrated Products, Inc.

Contact:
Maxim Integrated Products, Inc.
Web: http://www.maximintegrated.com




Review Article Be the first to review this article
Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Diversity: Really, who cares
More Editorial  
Jobs
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Methodology Automation Engineer for EDA Careers at San Jose, CA
DDR 3-4-5 Developer with VIP for EDA Careers at San Jose, CA
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
11th International Conference on Verification and Evaluation of Computer and Communication Systems at 1455 DeMaisonneuve W. EV05.139 Montreal Quebec Canada - Aug 24 - 25, 2017
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy