Renesas Electronics Delivers Contactless Wireless Charging Solution for Healthcare and Wearable Devices

Combines All Functions Needed for Wireless Charging on a Single Chip to Enable Compact Devices Resistant to Water and Dust

SANTA CLARA, Calif. — (BUSINESS WIRE) — September 26, 2016 — Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, today announced a contactless wireless charging solution for low-power applications, such as hearing aids and other wearable devices that require resistance to water and dust.

The new wireless charging solution consists of a power receiver integrated circuit (IC) (RAA457100) and a power transmitter IC (RAA458100). Each IC includes all functions needed for wireless charging on a single chip. Renesas will also offer an evaluation kit to help manufacturers with their wireless charging designs.

Wireless charging technology eliminates the need to change batteries or connect a power cable. This convenience has wide appeal for a variety of applications, such as smartphones and wearable devices. Wireless charging technology is of particular interest in low-power applications such as hearing aids that require small form factors as well as resistance to water and dust. However, existing wireless charging technologies have been considered unsuitable for charging systems employing compact lithium-ion (Li-ion) secondary batteries for these low-power applications associated with the difficulties in achieving smaller form factors with the antenna size mandated by the current standards; and heat dispersion due to large charging currents that are required to charge low-power applications.

With the new wireless charging solution, Renesas has combined its wireless charging system expertise with its proven microcontrollers (MCUs) to enable all key system components in a small space for easier design implementation.

Key features of the RAA457100 Power Receiver IC:

(1) Enabling more compact devices by integrating all functions needed for wireless charging in a 3.22mm x 2.77mm package

The power receiver IC incorporates a synchronous rectifier circuit that rectifies the AC power used to excite the antenna coil of the power receiver into direct current, and a charging control circuit for charging a (Li-ion) secondary battery. A 12-bit A/D converter is used to monitor the battery voltage and current during charging, and this data is supplied to the power transmitter to maintain the optimal charging power level. Protection features for the Li-ion secondary battery and a DC/DC regulator are also incorporated on a single chip.

(2) On-chip DC/DC converter with industry-leading efficiency of 85 percent for extended operation on battery power

Low-power applications such as wearable devices and hearing aids generally use compact batteries with small capacities, making efficiency crucial. The integrated DC/DC converter itself achieves industry-leading high efficiency of 85 percent when the system is operating at a low load level of around 1 mA, which enables longer battery life.

Key features of the RAA458100 Power Transmitter IC:

(3) Integration of all circuits needed for wireless power transmission and support for single 5 V power supply voltage from mobile batteries

In general, contactless power transmission involves applying a 125 kHz alternating current to the antenna coil of the power transmitter to excite the antenna coil of the power receiver and generate AC power. Renesas’ newly developed power transmitter IC drives a bridge circuit and controls the alternating current to obtain the transmission power value required by the power receiver. The power transmitter IC integrates a bridge circuit overcurrent protection function and a two-line external overheating protection function. System manufacturers can modify parameter values by programming the read registers with external EEPROM data via an I2C interface to meet their application needs. In addition, they can further customize the solution to their requirements by connecting an external MCU.

The μPA2690T1R power MOSFET from Renesas is recommended for configuring the bridge circuit. When it is combined with the RAA458100, the system manufacturer can choose between half-bridge and full-bridge circuit configurations to match the power level of the power transmitter.


Samples of the new wireless charging system solution will be available in November 2016. (Availability is subject to change.)

Renesas is positioning the new solution as a solution for system manufactures to easily add wireless charging functionality to low-power applications such as wearable devices and hearing aids.

For more information about Renesas, follow Renesas Electronics America at @RenesasAmerica on Twitter and

About Renesas Electronics America

Renesas Electronics Corporation ( TSE:6723) delivers trusted embedded design innovation with complete semiconductor solutions that enable billions of connected, intelligent devices to enhance the way people work and live—securely and safely. The number one global supplier of microcontrollers, and a leader in Analog & Power and SoC products, Renesas provides the expertise, quality, and comprehensive solutions for a broad range of Automotive, Industrial, Home Electronics (HE), Office Automation (OA) and Information Communication Technology (ICT) applications to help shape a limitless future. Learn more at .

1 | 2  Next Page »

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy