North American Semiconductor Equipment Industry Posts August 2016 Book-to-Bill Ratio of 1.03

SAN JOSE, Calif. — September 15, 2016 — North America-based manufacturers of semiconductor equipment posted $1.75 billion in orders worldwide in August 2016 (three-month average basis) and a book-to-bill ratio of 1.03, according to the August  Equipment Market Data Subscription (EMDS) Book-to-Bill Report published today by SEMI.  A book-to-bill of 1.03 means that $103 worth of orders were received for every $100 of product billed for the month.

SEMI reports that the three-month average of worldwide bookings in August 2016 was $1.75 billion. The bookings figure is 2.3 percent lower than the final July 2016 level of $1.80 billion, and is 5.0 percent higher than the August 2015 order level of $1.67 billion.

The three-month average of worldwide billings in August 2016 was $1.71 billion. The billings figure is approximately the same as the final July 2016 level of $1.71 billion, and is 8.4 percent higher than the August 2015 billings level of $1.58 billion.

"The book-to-bill ratio has been at or above parity since December of last year with current monthly bookings and billings levels at $1.7 billion,” said Denny McGuirk, president and CEO of SEMI.  “Given the current data trends, North American equipment suppliers are clearly benefiting from strong investments by device manufacturers in the second half of the year.”

The SEMI book-to-bill is a ratio of three-month moving averages of worldwide bookings and billings for North American-based semiconductor equipment manufacturers. Billings and bookings figures are in millions of U.S. dollars.

 

Billings
(3-mo. avg)

Bookings
(3-mo. avg)

Book-to-Bill

March 2016

$1,197.6

$1,379.2

1.15

April 2016

$1,460.2

$1,595.4

1.09

May 2016

$1,601.5

$1,750.5

1.09

June 2016

$1,715.2

$1,714.3

1.00

July 2016 (final)

$1,707.9

$1,795.4

1.05

August 2016 (prelim)

$1,708.1

$1,753.9

1.03

The data contained in this release were compiled by David Powell, Inc., an independent financial services firm, without audit, from data submitted directly by the participants. SEMI and David Powell, Inc. assume no responsibility for the accuracy of the underlying data.

The data are contained in a monthly Book-to-Bill Report published by SEMI. The report tracks billings and bookings worldwide of North American-headquartered manufacturers of equipment used to manufacture semiconductor devices, not billings and bookings of the chips themselves. The Book-to-Bill report is one of three reports included with the SEMI  Equipment Market Data Subscription (EMDS).

SEMI® connects more than 2,000 member companies and more than a quarter-million professionals worldwide to advance the science and business of electronics manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, and services that enable smarter, faster, more powerful, and more affordable electronic products. Since 1970, SEMI has built connections that have helped its members grow, create new markets, and address common industry challenges together. SEMI maintains offices in Bangalore, Beijing, Berlin, Brussels, Grenoble, Hsinchu, Moscow, San Jose, Seoul, Shanghai, Singapore, Tokyo, and Washington, D.C.  For more information about SEMI, visit  www.semi.org.



Contact:

Deborah Geiger/SEMI
Phone: 1.408.943.7988
Email:  Email Contact

Dan Tracy/SEMI
Phone: 1.408.943.7987 
Email:  Email Contact




Review Article Be the first to review this article

ALDEC:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Reverie: All That Glitters is not Past
More Editorial  
Jobs
SoC Design Engineer for Intel at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Senior Physical Design Engineer for Ambiq Micro at Austin, TX
Technical Marketing Manager Valley for EDA Careers at San Jose, CA
Digital and FPGA Hardware Designer for Giga-tronics Incorporated at San Ramon, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Upcoming Events
European 3D Summit 2017 at 3, parvis Louis Néel 38054 Grenoble France - Jan 23 - 25, 2017
3D Printing Electronics Conference at High Tech Campus 1, 5656 Eindhoven Eindhoven Netherlands - Jan 24, 2017
DesignCon 2017 at Santa Clara Convention Center Santa Clara CA - Jan 31 - 2, 2017
Embedded Neural Network Summit at San Jose CA - Feb 1, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy