Cadence to Showcase Latest PCB Design Tools at PCB West 2016

New Allegro and OrCAD Solutions Accelerate Development of Flex, Rigid-Flex Designs

SAN JOSE, Calif., Sept. 7, 2016­ — (PRNewswire) —  Cadence Design Systems, Inc. (NASDAQ: CDNS) will be featuring its latest scalable OrCAD® and Allegro® technologies at PCB West 2016 booth #400 from September 13-15 2016, in Santa Clara, Calif.

To register for the conference, visit


Cadence will be holding demonstrations and presentations at the booth highlighting:

  • New technology advancements that minimize design iterations and lower overall cost for flex and rigid-flex designs
  • Embedded Sigrity™ tools that ensure critical signals meet performance criteria and power integrity with more reliable access to IR-drop analysis results
  • PSpice® technology which provides faster, easier virtual prototyping
  • Synchronous, real-time team PCB design capability that provides increased efficiency and up to 50 percent reduced design time in dense designs
  • Easy-to-use Allegro PCB Editor and Sigrity environment that enables shortened design and verification time

Cadence also plans to present several talks that cover new technology developments that solve today's complex PCB and IC packaging challenges. The scheduled Cadence speaking sessions are:

  • MCAD-ECAD with Non-Electrical and Electrical Layers on Flex/Rigid-Flex Designs, 9 a.m. to 10 a.m. PT, Wednesday, September 14, Edward Acheson, principal product engineer
  • Digital Data Transfer Using IPC-2581, 10 a.m. to 11 a.m. PT, Wednesday, September 14, Hemant Shah, product marketing group director for the Custom IC & PCB Group
  • New Techniques to Address Layout Challenges of High-Speed Signal Routing, 3 p.m. to 4 p.m., Wednesday, September 14, Marita Baldwin, principal software engineer
  • Managing Backdrilling from Library Until Hand-off to Manufacturing, 9 a.m. to 10 a.m., Thursday, September 15, Michael Catrambone, senior principal product engineer
  • Routing DDR4 Interfaces Quickly and Efficiently, 11 a.m. to 12 p.m., Thursday, September 15, Michael Catrambone, senior principal product engineer


PCB West 2016 is on September 13-15, 2015.


Santa Clara Convention Center in Santa Clara, Calif.
Cadence is located in booth 400.
Also visit Cadence at the IPC-2581 Consortium booth #409.

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available at  

© 2016 Cadence Design Systems, Inc. All rights reserved worldwide.  Cadence, the Cadence logo and the other Cadence marks found at are trademarks or registered trademarks of Cadence Design Systems, Inc. All other trademarks are the property of their respective holders.


To view the original version on PR Newswire, visit:

SOURCE Cadence Design Systems, Inc.

Cadence Design Systems, Inc.


Review Article Be the first to review this article
CST Webinar Series


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
SEMICON Europe at Grenoble France - Oct 25 - 27, 2016
ARM TechCon 2016 at Santa Clara Convention Center Santa Clara CA - Oct 25 - 27, 2016
Call For Proposals Now Open! at Santa Clara Convention Center, Santa Clara, CA California CA - Oct 25 - 27, 2016
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy