Morpho's MovieSolid and Morpho Video WDR Now Available on Cadence Tensilica Imaging/Vision DSPs

SAN JOSE, Calif., Nov. 11, 2015 — (PRNewswire) — Cadence Design Systems, Inc. (NASDAQ: CDNS) and Morpho, Inc. (TSE Mothers: 3653) today announced that Morpho's MovieSolid® and Morpho Video WDR are now available on the Cadence® Tensilica® Vision P5 digital signal processor (DSP). Ported by vision industry experts at Morpho, these products make it much easier for designers to offer applications with advanced stabilization and image-correction capabilities with lower power consumption.

Cadence Logo.

MovieSolid is an embedded software program for stabilizing videos. It utilizes SOFTGYRO® for detecting motions accurately between consecutive image frames and correcting them in up to six degrees of freedom including pitch, yaw, back/forth and rolling in different directions. MovieSolid can also correct geometric distortions, which can be caused by complementary metal-oxide-semiconductor (CMOS) sensors. Coupled with an accelerometer and a GYRO sensor, MovieSolid can obtain better stabilization with less computational resources and lower power consumption. Morpho Video WDR is an embedded software program for correcting the dynamic range of colors and adjusting the brightness of an image. This software can estimate the dynamic range of colors from a single image, apply a local tone mapping over the entire image and globally correct the brightness from the estimated dynamic range of colors using two different modes as predefined parameter settings. These settings are natural (close to human perception of colors) and artistic (more dramatic effects). To learn more about Morpho's products/technologies, visit

The Tensilica Vision P5 DSP was designed for the complex algorithms in imaging, video and computer vision applications including innovative multi-frame image capture, video pre- and post-processing, object and face recognition, low-light enhancement and many other complex tasks. For more information, visit

"As a leading company in the field of image-processing technologies, Morpho is partnering with Cadence to maximize the capabilities of mobile platforms," said Masayuki Urushiyama, executive vice president of Global Sales and Marketing of Morpho. "With our collaboration on video stabilization and wide dynamic range technologies optimized for the Tensilica Vision P5 DSP, we look forward to taking the user experience with cameras on mobile devices to the next level."

About Cadence
Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers and research facilities around the world to serve the global electronics industry. More information about the company, its products and its services is available at

About Morpho
Established in 2004, Morpho, Inc. has built substantial brand recognition in the field of software image processing for mobile devices. Customers utilizing Morpho, Inc.'s software technologies include carriers, processing platform providers and mobile device manufacturers making the company a global player in mobile imaging. For more information, visit or contact Email Contact.

© 2015 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo, and Tensilica are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. MovieSolid and SOFTGYRO are registered trademarks of Morpho Inc. Morpho Video WDR is a trademark of Morpho Inc. All other trademarks are the property of their respective owners.

For more information, please contact:

Cadence Newsroom

Morpho Newsroom



Logo -


To view the original version on PR Newswire, visit:

SOURCE Cadence Design Systems, Inc.

Cadence Design Systems, Inc.
Morpho, Inc.

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
SEMICON Europe at Grenoble France - Oct 25 - 27, 2016
ARM TechCon 2016 at Santa Clara Convention Center Santa Clara CA - Oct 25 - 27, 2016
Call For Proposals Now Open! at Santa Clara Convention Center, Santa Clara, CA California CA - Oct 25 - 27, 2016
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy