Cadence Implementation and Signoff Tools Certified on Intel Custom Foundry 14nm Process

SAN JOSE, Calif., June 4, 2015 — (PRNewswire) —  Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that its implementation and signoff tools have achieved certification on the Intel® 14nm process for customers of Intel Custom Foundry. Intel Custom Foundry utilized a PowerVR Series6 GPU from Imagination Technologies as part of the certification process.

Cadence Logo

The tool certification and enablement provides Intel Custom Foundry customers with a complete and integrated system-on-chip (SoC) design flow. Cadence® tools in the flow include:

  • Innovus™ Implementation System: This next-generation physical implementation solution enables SoC developers to deliver designs for Intel's advanced second generation of tri-gate technology.
  • Quantus™ QRC Extraction Solution: This tool uses a single Intel Custom Foundry-certified techfile and delivers a faster, scalable solution by supporting both cell-level and transistor-level extractions during design implementation and signoff with best-in-class accuracy versus foundry golden.
  • Tempus™ Timing Signoff Solution: This tool provides full-chip static timing analysis (STA) with gate-level delay calculation including signal integrity (SI) analysis, advanced on-chip variation analysis, advanced-node functionality required for double-patterning and waveform effects, and optimization for timing and leakage power.
  • Physical Verification System: This full-chip system provides multi-patterning decomposition (MPT), design rule checks (DRC), layout versus schematic (LVS), design for manufacturing (DFM) metal fill, electrical rule checks (ERC), and high-capacity chip-finishing that integrates with the Virtuoso® custom IC platform and Innovus Implementation System to significantly reduce iterations and achieve faster physical signoff.
  • Spectre® Circuit Simulator, Spectre RF Simulation and Spectre Accelerated Parallel Simulator: These tools provide fast, accurate SPICE-level simulation for tough analog, radio frequency (RF) and mixed-signal circuits.

For more information on the Cadence tools that are certified, please visit www.cadence.com/products/Pages/all_products.aspx, and for more information on Intel Custom Foundry, please visit www.intel.com/foundry.

"The certified Cadence tools offer a complete and integrated flow for our customers, so they can implement and verify differentiated SoCs on Intel's 14nm design platform utilizing the second generation of tri-gate transistors," said Ali Farhang, vice president, Design Enablement and Services, Intel Custom Foundry. "We worked closely with Cadence and Imagination to optimize the design ecosystem for customers who are creating advanced-node designs."

"Our collaboration with Intel on the certification process provides customers with added confidence that the Cadence flow can perform optimally on Intel Custom Foundry's 14nm design platform," said Dr. Anirudh Devgan, senior vice president and general manager of the Digital and Signoff Group at Cadence. "Intel Custom Foundry's growing customer base can now create differentiated SoCs on the Intel 14nm process using the full Cadence tool flow."

"Our PowerVR Series6 GPU is designed to enable advanced graphics and efficient GPU compute performance for a wide range of mobile and embedded devices," said Tony King-Smith, EVP marketing, Imagination Technologies. "The collaboration with Intel and Cadence has enabled us to ensure the design flow delivers excellent results on the 14nm process."

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers and research facilities around the world to serve the global electronics industry. More information about the company, its products and its services is available at http://www.cadence.com/.

© 2015 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo, Spectre and Virtuoso are registered trademarks and Innovus, Quantus, and Tempus are trademarks of Cadence Design Systems, Inc. in the United States and other countries. All rights reserved. All other trademarks are the property of their respective owners.

For more information, please contact:
Cadence Newsroom
408-944-7039
Email Contact

Chuck Mulloy
Intel Corporation
408-765-3484
cmulloy@intel.com

Logo - http://photos.prnewswire.com/prnh/20140102/SF39436LOGO

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/cadence-implementation-and-signoff-tools-certified-on-intel-custom-foundry-14nm-process-300093989.html

SOURCE Cadence Design Systems, Inc.

Contact:
Cadence Design Systems, Inc.
Web: http://www.cadence.com




Review Article Be the first to review this article

True Circuits:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: UltraPLL



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy