New Tensilica Fusion DSP Sets Low-Energy Benchmarks for IoT, Wearables and Wireless Connectivity

Flexible and scalable DSP is ideal for applications requiring ultra-low power in a small footprint

SAN JOSE, Calif., 22 Apr 2015 - Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced the new Cadence® Tensilica® Fusion digital signal processor (DSP) based on the proven Xtensa® Customizable Processor. This scalable DSP is ideal for applications requiring merged controller plus DSP computation, ultra-low energy and a small footprint. It can be designed into systems on chip (SoCs) for wearable activity monitoring, indoor navigation, context-aware sensor fusion, secure local wireless connectivity, face trigger, voice trigger and voice recognition. Optional Instruction Set Architecture (ISA) extensions are included to accelerate multiple wireless protocols including Bluetooth Low Energy, Thread and Zigbee using IEEE 802.15.4, SmartGrid 802.15.4g, Wi-Fi 802.11n and 802.11ah, 2G and LTE Category 0 release 12 and 13, and global navigation satellite systems (GNSS). 

The Tensilica Fusion DSP sets a new ultra-low-power benchmark using 25 percent less energy, based on running a power diagnostic derived from the Sensory Truly Handsfree™ always-on algorithm, when compared to the current low-power Cadence Tensilica HiFi Mini DSP. 

For more information, visit

The Tensilica Fusion DSP combines an enhanced 32-bit Xtensa control processor with market-leading base DSP features and flexible algorithm-specific acceleration for a fully programmable approach, supporting multiple existing and developing standards and customer algorithms. Many IoT applications are space- and energy-constrained, but still require advanced sensor processing, wireless communications and control. IoT device designers can configure just the options they need using the Xtensa Processor Generator to create an optimized Tensilica Fusion processor. Tensilica Fusion DSP configurable elements include:
  • Tightly integrated floating point
  • 1-4 MACs supporting real and complex operations
  • AES-128 encryption
  • Flexible memory architecture
  • MAC and PHY algorithm acceleration
  • Audio/voice compatibility with the Tensilica HiFi architecture
The Tensilica Fusion DSP combines flexible hardware choices with a library of DSP functions and more than 150 audio/voice/fusion applications from over 70 partners. It also shares the Tensilica partner ecosystem for other applications software, emulation and probes, silicon and services, and much more. The Tensilica Xtensa architecture is the second most popular licensable processor architecture, shipping at a rate of over 2B cores per year in products spanning sensors to supercomputers.

About Cadence
Cadence enables global electronic design innovation and plays an essential role in the creation of today’s integrated circuits and electronics. Customers use Cadence software, hardware, IP and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers and research facilities around the world to serve the global electronics industry. More information about the company, its products and its services is available at
© 2015 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Tensilica, Xtensa and the Cadence logo are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks or registered trademarks are those of their respective holders. 
“As we were designing Tensilica Fusion DSP, we saw that our customer requirements varied greatly,” stated Martin Lund, senior vice president of the IP Group at Cadence. “We took those requirements into consideration while designing this DSP to extend beyond anything in the market today. The Xtensa Customizable Processor allows customers to further optimize the processor to create distinctive, highly efficient processors and DSPs that will help set them ahead of their competition.” 

“We see strong growth opportunities ahead in the applications targeted by the new Tensilica Fusion DSP,” stated Will Strauss, president of Forward Concepts. “The fact that the Tensilica Fusion DSP can do both DSP and control is a really strong point, allowing a stand-alone capability, often without the need of an associated application processor. Because the Fusion DSP is highly customizable, designers can design it into many different high-volume chips supporting a great number of end products.” 

“Sensory’s TrulyHandsFree solution is ideal for real-world noisy environments where voice activation provides a secure and superior user experience,”  stated Bernard Brafman, vice president of business development at Sensory. “By taking full advantage of the architectural features in the new Fusion DSP, we were able to optimize our software to achieve further power reduction for functions such as trigger to search, user-defined triggers, and speaker verification and identification.” 

“We ported our software to the Tensilica Fusion DSP and demonstrated it at this year’s Mobile World Congress,” said Chad Lucien, senior vice president of Sales and Marketing at Hillcrest Labs. “The Fusion DSP provides an excellent foundation for ultra-low-power sensor hubs. Our partnership with Cadence provides a great benefit for our customers looking to design devices with outstanding user experience and optimal battery performance.”

Cadence Newsroom

Review Article Be the first to review this article

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Technical Support Engineer for EDA Careers at Freemont, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy