Embrionix to bring the world’s first JPEG 2000 SFP module powered by intoPIX technology at NAB 2015.

The disruptive SFP product will ease the JPEG 2000 deployment in broadcast infrastructures for video over IP.

Mont-Saint-Guibert, Belgium and Laval, Canada – intoPIX, the leading provider of JPEG 2000 technology and Embrionix, the leading provider of SFP modules for broadcast applications have collaborated to bring the world’s first emSFP integrating a JPEG 2000 engine for video over IP applications. The new product will be officially presented at NAB.

This innovative SFP module follows the Video Services Forum (VSF) recommendation TR01 for Transporting JPEG 2000 Broadcast Profile video in MPEG-2 TS over IP. The new product is ideal for Live production workflows: it enables HD video to be visually lossless compressed with the lowest latency. A 1080P60 video stream will typically compress down to a range of 150-400 Mbps.

“Embrionix successfully ported our JPEG 2000 FPGA IP-core into a SFP module, previously perceived as an impossible challenge.” said Gael Rouvroy, intoPIX CTO and founder.

“By pushing the boundaries of traditional SFP design with a state-of-the-art low footprint / low power JPEG2000 implementation, we take a major step in pursuing our goal of delivering more flexibility to broadcast manufacturers.” , said Renaud Lavoie, CEO of Embrionix.  

Both Embrionix (booth N1617) and intoPIX (booth C8426b) will show the first JPEG 2000 emSFP product during NAB 2015. The two companies welcome everybody to sample the intoPIX SMPTE 2022 EMMY®-Award winning JPEG 2000 technology and the Embrionix new emSFP product. 

About intoPIX

intoPIX is a leading supplier of image compression technology to audiovisual equipment manufacturers. We are passionate about offering people a higher quality image experience and have developed FPGA IP-cores and software tools that enable leading-edge TICO Lightweight compression, JPEG 2000 compression, security, video over IP and hardware enforcement. More information on our company, customers and products can be found on  www.intopix.com.

About Embrionix

Embrionix provides a new approach in the product interface market for broadcast manufacturers.

Embrionix designs and builds innovative, advanced SMPTE VIDEO SFPs to close the gap between 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, SD-SDI fiber optic deployments, 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, SD-SDI coaxial deployments, and emerging technology deployments, such as HDMI, composite video, Ethernet, etc...

By leveraging its core competencies in video broadcast, the company provides VIDEO SFP modules (emSFP) with the highest level of flexibility to major broadcasters in the industry.

The company is based in Laval, Canada, and has global design, research and development, and sales offices located in Canada, California, France, Germany, Israel, United Kingdom and Japan.


Contact:                                                                                                    

Rue Emile Francqui
intoPIX s.a.
Tel: +32 10 23 84 70
Email Contact




Review Article Be the first to review this article

ALDEC:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Reverie: All That Glitters is not Past
More Editorial  
Jobs
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Senior Physical Design Engineer for Ambiq Micro at Austin, TX
SoC Design Engineer for Intel at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Digital and FPGA Hardware Designer for Giga-tronics Incorporated at San Ramon, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Upcoming Events
European 3D Summit 2017 at 3, parvis Louis Néel 38054 Grenoble France - Jan 23 - 25, 2017
3D Printing Electronics Conference at High Tech Campus 1, 5656 Eindhoven Eindhoven Netherlands - Jan 24, 2017
DesignCon 2017 at Santa Clara Convention Center Santa Clara CA - Jan 31 - 2, 2017
Embedded Neural Network Summit at San Jose CA - Feb 1, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy