MaxLinear 32-Channel Receiver and PGA Chosen by Hitron for DOCSIS® 3.0 Gateway

  • MxL268 Receiver Enables Hitron Consumer Premises Equipment to Deliver Bandwidth of Up to 1.6Gbps
  • MxL231 PGA Delivers the Lowest Power, Size and Cost for Upstream Extended Power Output

CARLSBAD, Calif. & LAS VEGAS — (BUSINESS WIRE) — January 5, 2015 — MaxLinear, Inc. (NYSE: MXL), a leading provider of integrated radio frequency (RF) and mixed-signal integrated circuits for broadband communications applications, today announced that Hitron Technologies Inc. (TAIEX: 2419), a leading global telecommunications networking company, has selected the MxL268 Full-Spectrum Capture (FSC™) 32-channel digital cable front-end receiver and the MxL231 programmable gain amplifier (PGA) for a new family of DOCSIS 3.0 consumer premises equipment (CPE) delivering data rates up to 1.6Gbps.

Hitron will demonstrate its next-generation 32-channel DOCSIS 3.0 products at the Consumer Electronics Show 2015 in Las Vegas, which runs from Jan 6-9.

The MxL268 captures the entire 1 Gigahertz (GHz) cable spectrum, enabling cable operators to configure their systems flexibly to receive up to 32 channels, each channel being 6 MHz or 8 MHz in bandwidth, located anywhere in the cable spectrum, in order to meet the diverse consumer requirements of different combinations of data speeds and number of video channels. By being able to flexibly combine up to 32 multiple channels, cable operators can support data speeds of up to 1.6Gbps using a DOCSIS 3.0 data modem and the existing DOCSIS 3.0 cable infrastructure.

With its FSC technology, the MxL268 receiver replaces several discrete, single-channel cable tuners with just one broadband multi-channel receiver. This significantly reduces the power consumption in Hitron’s next-generation gateways, minimizes board footprint, eliminates expensive external RF components and simplifies the design of Hitron’s platforms.

Delivering up to 1.6Gbps throughput, the MxL268 is an ideal fit for cable operators looking to exceed speeds offered by fiber-to-the-home (FTTH) competitors without requiring further investment in their existing infrastructure.

PGA brings low power to gateway front-end design

Complementing MaxLinear’s popular FSC receivers for 16-, 24- and 32-channel DOCSIS 3.0 gateways, the MxL231 PGA reduces front-end power dissipation by up to 1.6W compared to existing PGA offerings. As cable operators migrate from four-channel to eight-channel QAM upstream services requiring extended power output, reducing power dissipation in the front-end simplifies thermal design efforts and reduces heat mitigation costs.

Meeting the ever-increasing consumer demand for media and data content, Hitron’s gateways provide cable operators the additional channel tuning capacity and downstream bandwidth required to enable rich multimedia and high data content services at home.

“We are pleased to be working with Hitron as joint leaders in the 32-channel cable market to deliver the highest data rate DOCSIS 3.0 gateways,” said Kishore Seendripu, MaxLinear’s Chief Executive Officer. “Video gateway and set-top box markets are evolving rapidly as cable providers strive to meet burgeoning consumer demand for bandwidth and content that leverage their existing infrastructure investments. We are looking forward to supporting Hitron with our MxL268 receiver and MxL231 PGA to facilitate more efficient distribution of video and IP services, faster download speeds, lower power and lower cost designs.”

“Our upcoming 32-channel DOCSIS CPE offers the high levels of quality and performance that our customers always expect from us,” said Jeff Hsu, President of Hitron Technologies. “The MxL268 helps to meet those high standards and the MxL231 further enhances our leading low-power position. The level of integration achieved in the chips plays a big part in making our next-generation products competitive in the market.”

MxL268 Technical Highlights

Based on MaxLinear’s industry-leading, low-power 40 nm CMOS process technology, the MxL268 offers a monolithic digital cable front-end with integrated LNA and signal conditioning functions combined with a Full-Spectrum Capture receiver.

In full 32-channel receive mode of operation, the MxL268 provides up to 1.6Gbps downstream speeds and consumes less than 75mW per channel, eliminating the need for expensive heat removal components such as fans, heat shields and heat sinks inside customer equipment.

The MxL268 is pin compatible with MaxLinear’s MxL265 16-channel and MxL267 24-channel receivers, simplifying the effort of upgrading designs to 32 channels. Manufacturers can easily migrate to 32 channels and reuse their investment in existing 16- or 24-channel gateway designs by simply replacing the receiver with the MxL268.

The MxL268 supports remote spectrum analyzer functions that report network health and performance parameters, which can be used by cable operators in managing and troubleshooting their networks. This innovative feature allows cable operators to avoid costly technician visits to customer homes by remotely monitoring and diagnosing potential problems with customer premises equipment.

The MxL268 is compliant with Energy Star and the European Code of Conduct for Digital TV Services and Broadband Equipment requirements for both standby and operating modes.

1 | 2  Next Page »

Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
Staff Software Engineer - (170059) for brocade at San Jose, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer for EDA Careers at Freemont, CA
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy