eMemory Offers IP Industry-Leading Hybrid MTP SIP

Hsinchu, Taiwan (Nov 19, 2014)—Targeting the market demand of integrated IC, eMemory announced today the availability of Hybrid MTP, a leading integrated Multiple Times Programmable (MTP) Silicon Intellectual Property (SIP). Base on the applications, clients can select the suitable OTP solution (NeoBit) and MTP solution (NeoMTP) from eMemory’s diverse SIP portfolio, and customize the composition of OTP and MTP in the Hybrid MTP. Hybrid MTP is the comprehensives solution for fulfilling clients’ requirements including competitive production cost, compact cell size, and excellent product performance, which enables clients to stride in the growing markets of portable devices, mobile communications, and Internet of Things (IoT).

In the past, to fulfill for OTP and MTP storage proposes including operation commands storage, parameter setting, and program access simultaneously; individual embedded flash memory was used as design solutions of consumer electronics application ICs such as microcontroller (MCU). This “over quality” memory solution required highly complex process which leads to higher wafer production cost compared. As the result, the concept of OTP/MTP hybrid solution and the demand of “one-stop shop” embedded memory services emerged as consumer electronics suppliers were in need for cost-effective alternatives.

Due to most IP providers could only offer either OTP or MTP rather than a total integrated solution, partial SIP must be purchased externally for further integration. Consequently, the incompatible OTP and MTP SIP layout designs impede circuits with the same function from being integrated for size optimization. Moreover, signal noise and excess power consumption may also occur as incompatible circuit designs caused transmission malfunction. All the aforementioned factors hence increase the demands of OTP/MTP integration services.

In response to the market demands and product development trends, eMemory developed the industry-leading hybrid MTP and integration services which transcend the conventional “one-stop shop” service. Compared to vendors who could only provide either OTP or MTP solutions, eMemory offers clients with comprehensive selections of both OTP and MTP SIP according to their application requirements such as ID setting, encryption, parameter setting, system calibration, and function selection. Furthermore, the OTP/MTP composition in Hybrid MTP can be flexibly adjusted to customize integrated ICs which most suitable to clients’ needs.

By eliminating the obstacles of signal transmission between SIPs of different origins and the associated noise as well as dissipation issues, eMemory’s integrated Hybrid MTP solution offers superior performance. As the cell size of OTP is smaller compared to MTP and the simpler circuit requires less testing time, when eMemory developed OTP and MTP SIP are adopted for Hybrid MTP integration, the same peripheral circuits can be shared to achieve size optimization. For example, when the OTP composition in the Hybrid MTP reaches 87.5%, the SIP dimension can be reduced significantly by 41%, while the testing time can be decreased up to 38%. All of the above demonstrate Hybrid MTP’s advantages in terms of competitiveness and efficiency.

The integrated Hybrid MTP solution can be adopted onto the extensive OTP process platforms eMemory developed. This solution is ideal for cost-sensitive and compact-designed applications including Touch Panel Controller, MCU, Radio Frequency ICs (RFIC), SoC, and Touch with Display Driver ICs (TDDI) which combines both display and touch functions in one single IC; assisting clients to advance into the extensive market of portable devices, mobile communication, and IoT. eMemory’s Hybrid MTP solution offers the technical and cost advantages of both OTP and MTP, which will not only expand the range of clients’ product applications, but also create values for clients in new perspectives.

About eMemory:

eMemory (TWSE: 3529) is a global leader in logic process embedded non-volatile memory (eNVM) silicon IP. Since established in 2000, eMemory has been devoted to research and development of innovative technologies, offering the industry’s most comprehensive platforms of patented eNVM IP solutions include NeoBit (OTP silicon IP), NeoFuse (anti-fuse OTP silicon IP), NeoMTP (1,000+ times programmable silicon IP), NeoFlash (10,000+ times programmable silicon IP), and NeoEE (100,000+ times programmable silicon IP) to semiconductor foundries, integrated devices manufacturers (IDMs) and fabless design houses worldwide. eMemory’s eNVM silicon IPs support a wide range of applications include trimming, function selection, code storage, parameter setting, encryption, and identification setting. The company has the world’s largest NVM engineering team and prides itself on providing partners a full-service solution that sees the integration of eMemory eNVM IP from initial design stages through fabrication. For more information about eMemory, please visit  www.ememory.com.tw.


Contact:

Michelle Wang
Public Relations Department
eMemory Technology Inc.  
Phone: +886-3-5601168 #1121
Email:  Email Contact





Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy