52nd Design Automation Conference Designer Track Submission Site Opens

2015 tracks include front-end silicon design, back-end silicon design and embedded software and systems

LOUISVILLE, Colo. — (BUSINESS WIRE) — November 12, 2014The Design Automation Conference (DAC), the premier conference devoted to the design and automation of electronic systems, is pleased to announce the submission site for the 52nd DAC Designer Track is now open. The Designer Track brings together IC designers and embedded software developers from across the globe to present their design experiences on effective design flows, methods, and tool usage. The track offers a unique opportunity to network with and learn from other industry experts. The 52nd DAC will be held at the Moscone Convention Center in San Francisco, California, from June 7 - 11, 2015.

“The focus of the Designer Track is on the flows and methodologies deployed for ASIC design, verification, implementation and software integration by the user,” said Designer Track co-chairs Karam Chatha of Qualcomm Research and Daniel Bourke of Cadence Design Systems. “This track is the only one of its kind, developed exclusively by DAC to provide EDA tool users, hardware designers, software engineers, and application engineers the opportunity to share knowledge and experiences with each other. The covered topics are at the interface between design and automation, an area that until now has been under-represented in EDA.”

Submissions may describe the application of tools to the design of a novel electronic system or the integration of EDA tools within a design flow or methodology to produce such systems. A submission may be problem-specific in scope (e.g., hardware/software-based architecture exploration, analyzing substrate coupling during floorplanning) or may address a specific application domain (e.g., designing wireless handsets). The Designer Track differs from vendor-specific user forums in that it is not tied to a specific EDA vendor.

Designer Track

Regular submissions will be accepted in the following categories:

1.

   

Front-end silicon design (FE): Front-end architecture, design and verification of current day system-on-chip (SoC) including major components such as CPU, GPU, and DSP. Front-end design of entire SoC sub-systems such as graphics, multimedia and modem.

 

2.

Back-end silicon design (BE): Back-end design and verification of current day SoC, major sub-systems and constituent components (CPU, GPU and DSP). Relevant topics include (but are not limited to) physical design, clock tree generation, timing closure, verification, and design rule checking.

 

3.

Embedded software and systems (ESS): Compilers (CPU, GPU, DSP) and programming aids, parallelizing tools, test and verification, operating system (including RTOS), virtual platform, virtual machines and run time environments.

 

1 | 2  Next Page »



Review Article Be the first to review this article
CST: Webinar

Aldec Simulator Evaluate Now

Featured Video
Jobs
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
Design Verification Engineer for Cirrus Logic, Inc. at Austin, TX
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
DSP Tools Engineer for Cirrus Logic, Inc. at Austin, TX
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
Upcoming Events
IC Open Innovation Panel During REUSE 2017 at Santa Clara Convention Center 5001 Great America Parkway Santa Clara CA - Dec 14, 2017
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise