Altera and MathWorks Deliver Unified Model-Based Design Workflow for Altera SoCs

New Workflow Automates the Integration of Hardware and C Code into Altera SoCs

SAN JOSE, Calif., Nov. 5, 2014 — (PRNewswire) —  Altera Corporation (Nasdaq: ALTR) today announced new programming support for its ARM-based SoCs using industry-standard workflows from MathWorks. Release 2014b from MathWorks includes an automated, highly integrated model-based design workflow optimized for Altera SoCs. Designers using this flow can accelerate their algorithmic designs in Altera SoCs while staying in a high-level programming environment and save weeks of development time.

New workflow automates the integration of hardware and C code into Altera SoCs

"Today's announcement is a significant extension to our partnership with Altera, enabling our customers to quickly and easily leverage the performance and system-level benefits that Altera SoCs provide," said Ken Karnofsky, senior strategist for signal processing applications at MathWorks. "Engineers now have a highly-automated SoC workflow for modeling algorithms in MATLAB and Simulink, simulating with system test benches, partitioning into hardware and software subsystems, generating C and HDL code, and prototyping with Altera design tools and development kits."

The highly integrated hardware/software workflow allows programmers to simulate, prototype, verify and implement algorithms that target both the FPGA and ARM processors integrated in Altera SoC FPGAs. The design flow automatically generates the interfaces between the FPGA, the integrated processor system and the software drivers. Targeted support for Altera SoCs is included in two MathWorks code generation products, the HDL Coder™ and Embedded Coder® tools. Using a single development environment, engineers use HDL Coder to generate custom IP cores and configure the programmable logic portion of the SoC, while Embedded Coder is used to generate C/C++ code that runs on the ARM-based hard processor system.  

A model-based design environment targeting Altera SoCs accelerates the design process by allowing designers to stay in a familiar design environment without requiring designers to be experienced hardware engineers. Designers leveraging Altera SoCs can accelerate their algorithms in the FPGA portion of the device while running the rest of their design in the ARM processors. Release 2014b includes automated support for Altera's low-cost Cyclone® V SoCs, including automatic programming of Cyclone V SoC development boards.

"We are very excited about this new level of design support provided by MathWorks for our SoCs," said Joerg Bertholdt, director of embedded software marketing at Altera. "Our SoCs are built on a solid foundation that is based on a superior architecture, industry-standard development tools and broad operating system support. The addition of a MathWorks-offered model-based design flow to our SoC ecosystem makes it much easier for designers to adopt and benefit from the performance and power savings this class of device offers."

Availability:
This model-based design workflow support for Altera SoCs is available now from MathWorks in its R2014b software release. For more information, or to download, visit www.mathworks.com/alterasoc. The Embedded Coder Support Package and the HDL Coder Support Package for Altera SoCs support both Altera's Cyclone V SoC Development Kit and Arrow's SoCkit Development Kit.

About Altera
Altera® programmable solutions enable designers of electronic systems to rapidly and cost effectively innovate, differentiate and win in their markets. Altera offers FPGAs, SoCs, CPLDs, and complementary technologies, such as power management, to provide high-value solutions to customers worldwide. Visit Altera at www.altera.com.  

ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. MATLAB and Simulink are registered trademarks of The MathWorks, Inc. See mathworks.com/trademarks for a list of additional trademarks. All other words and logos identified as trademarks or service marks are the property of their respective holders as described at www.altera.com/legal.

Editor Contact:
Steve Gabriel
Altera Corporation
(408) 544-6846
Email Contact

Altera(R) programmable solutions enable designers of electronic systems to rapidly and cost effectively innovate, differentiate and win in their markets. Altera offers FPGAs, SoCs, CPLDs, ASICs and complementary technologies, such as power management, to provide high-value solutions to customers worldwide.

Photo - http://photos.prnewswire.com/prnh/20141105/156676

Logo - http://photos.prnewswire.com/prnh/20101012/SF78952LOGO

SOURCE Altera Corporation

Contact:
Altera Corporation
MathWorks
Web: http://www.altera.com




Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
Staff Software Engineer - (170059) for brocade at San Jose, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
2017 IoT Developers Conference at Santa Clara Convention Center California - Apr 26 - 27, 2017
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy