D68HC11K with applications notes, development board & tools from Digital Core Design

Digital Core Design, celebrating its 15th anniversary this year, has introduced the D68HC11K, which is a synthesizable soft IP Core Microcontroller, fully compatible with the Motorola MC68HC11K industry standard. It can be used as a direct replacement for the microcontrollers like: MC68HC11K0, MC68HC11K1, MC68HC11K4, MC68HC711K4, MC68HC11KS2 and MC68HC711KS2.

Bytom, Poland. October 1st 2014.  In a standard configuration, the core has an integrated on-chip major peripheral functions. An asynchronous serial communication interface (SCI) and a separate synchronous serial peripheral interface (SPI) are included. The main 16-bit, free-running timer system, contains input capture and output-compare lines and a real-time interrupt function. An 8-bit pulse accumulator subsystem can count external events or measure external periods. – This and additional modes make the D68HC11K IP Core especially attractive for automotive and battery-driven applications – says Jacek Hanke, DCD’s CEO. Memory expansion unit (with six address extension lines) allows up to sixteen 32K byte banks of external memory to be addressed in either of two bank windows. The MEU extension of memory space can be up to 1MB. Self-monitoring, on-chip circuitry is included, to protect D68HC11K against system errors. To enable optima functionality in design, DCD’s IP Core implements eg:  

  •  The Computer Operating Properly (COP) watchdog system, which protects against software failures
  •  An illegal opcode detection circuit provides a non-maskable interrupt, if illegal opcode is detected.
  •  Two software-controlled power-saving modes - WAIT and STOP avail to conserve additional power.

The D68HC11K Microcontroller Core can be equipped with the ADC Controller, which allows the usage of external ADC Controller with standard ADC software. This ADC Controller makes external ADC's visible in exact the same way as internal ADC's in original 68HC11K Microcontrollers.

DCD’s IP Core is fully customizable - it is delivered in the exact configuration, to meet users' requirements. There is no need to pay extra for not used features and wasted silicon. It includes fully automated testbench with complete set of tests, allowing easy package validation, at each stage of SoC design flow.

And last but not least, to allow easy software debugging and validation, the D68HC11K has a built-in support for DoCDTM - a real-time hardware debugger, which provides debugging capability of
a whole System-on-Chip (SoC).

Unlike other on-chip debuggers, the DoCDTM provides a non-intrusive debugging of running application. It can halt, run, step into or skip an instruction, read/write any contents of microcontroller, including all registers and SFRs, including user defined peripherals, data and program memories.

More information: http://dcd.pl/ipcore/88/d68hc11k/

Contacts:
Tomeq Cwienk,
tel: + 48 32 282 82 66 ext.25,
skype: tomasz.cwienk,
mail to: Email Contact
Digital Core Design, ul. Wroclawska 94, 41-902 Bytom, Poland

CPU Features:

  •  Cycle compatible with original implementation
  •  Software compatible with 68HC11K industry standard
  •  I/O Wrapper, making it pin-compatible core
  •  SFR registers remapped to any 4KB memory page
  •  Two power saving modes: STOP, WAI
  •  Fully synthesizable
  •  Static synchronous design
  •  No internal tri-states
  •  Scan test ready

Information about Digital Core Design:

In 2014 Digital Core Design celebrates its 15th Anniversary. The company founded in 1999, since the beginning stands in the forefront of the IP Core market. High specialization and profound customer service enabled to introduce more than 70 different architectures. Among them is the world’s fastest 8051 IP Core, the DQ80251, which is more than 66 times faster than the standard solution. As an effect, over 300 hundred licensees have been sold to more than 500 companies worldwide. Among them are the biggest enterprises like e.g. Sony, Siemens, General Electric and Toyota. But a lot of DCD’s customers are small businesses, R&D laboratories or front/back end offices, which require exact solution tailored to their project needs. Rough estimations say that more than 250 000 000 devices around the globe have been based on Digital Core Design’s IP Cores.

 




Review Article Be the first to review this article
CST: Webinar November 9, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Upcoming Events
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise