Media Alert: Cadence to Demonstrate 16FF+ Design Solutions at TSMC 2014 OIP Ecosystem Forum

SAN JOSE, Calif., Sept. 25, 2014 — (PRNewswire) —  Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation, today announced it is scheduled to demonstrate how it leverages the TSMC Open Innovation Platform® (OIP) to optimize customer designs and manufacturing efficiency to ensure first-time product success on the 16nm FinFET Plus (16FF+) process at TSMC 2014 OIP Ecosystem Forum. The event is being held on September 30, 2014 in San Jose, CA, and Cadence will be in booth #614.

Cadence Logo.

Cadence is scheduled to deliver the following presentations in the EDA and IP tracks:

  • In-Design Signoff Key to Design Rule Check (DRC) Turnaround Time for 16nm IC Designs: 11:00–11:30am, Esther Tsai, staff product engineer at Cadence
  • 10nm FEOL/MEOL Challenges and Process Development with Parasitic RC Extractions: 1:30–2:00pm, Hao Ji, software engineering group director at Cadence, and Sean Lee, deputy director at TSMC
  • DDR4 Subsystem Implementation on 16FF/16FF+ Targeting Infrastructure Applications—Challenges and Design Techniques: 2:30–3:00pm, Anurag Jain, design engineering director at Cadence
  • Tempus  Timing Signoff Solution for Certification in 16FF/10FF TSMC Flows: 4:00–4:30pm, Florentin Dartu, senior program manager at TSMC
  • Managing 16FF IC Design Challenges for Custom and Analog Designers: 4:30–5:00pm, Akshat Shah, product engineering director at Cadence
  • Tackling Coloring, Cell Pin Access, Variability, and Late-Stage ECOs for TSMC 10nm with Cadence® Encounter® Digital Implementation System: 5:00–5:30pm, Rahul Deokar and Ruben Molina, product marketing directors at Cadence

In addition, Cadence plans to showcase its 16FF+ design solutions in booth #614 including:

  • Digital implementation solutions (front-end design (FED) and Encounter Digital Implementation System)
  • Virtuoso® custom solutions
  • Physical signoff and verification (PVS/DFM) solutions
  • Electrical signoff solutions
  • Custom/mixed-signal flow solutions
  • 3D-IC solutions
  • DDR4 16FF PHY and controller IP solutions

To register for the conference, click here.

The TSMC 2014 OIP Ecosystem Forum is scheduled for September 30, 2014.

Santa Jose Convention Center in San Jose, CA
Cadence is located in booth #614.

About Cadence

Cadence (NASDAQ: CDNS) enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available here.

© 2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo, Encounter, and Virtuoso are registered trademarks and Tempus is a trademark of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

For more information, please contact:
Cadence Newsroom
Email Contact

Logo -

SOURCE Cadence Design Systems, Inc.

Cadence Design Systems, Inc.

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
SENIOR ASIC Design Engineer for TiBit Communications at Petaluma, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy