Carbon Design Systems to Exhibit at ARM TechCon, Showcasing New Carbon System Exchange Web Portal

ACTON, MA -- (Marketwired) -- Sep 24, 2014 --


WHO: Carbon Design Systems® Inc., the leading supplier of accurate virtual prototype solutions

WHAT: Will exhibit at ARM® TechCon in Booth #421, showcasing the newly announced Carbon System Exchange, a web portal enabling greater designer productivity using pre-built virtual prototype systems. Carbon will demonstrate its system-level virtual prototype solutions and virtual prototype models, including Carbon Performance Analysis Kits (CPAKs), pre-built systems or subsystems with software at the bare metal or operating system (O/S) level.

WHERE: Santa Clara Convention Center, Santa Clara, Calif.

WHEN: Wednesday, October 1, from 11 a.m. until 6 p.m. and Thursday, October 2, from 10:30 a.m. until 5:30 p.m.

Jason Andrews, Carbon's director of Product Engineering, will present "Performance Optimization for an ARM Cortex-A53 System Using Software Workloads and Cycle Accurate Models." His talk will be held Friday, October 3 from 3:30 p.m. until 4:20 p.m. as part of the System Design, Software Development and Optimization Track. Andrews will describe how virtual prototypes can be used to perform system optimization by running bare metal and O/S-level benchmarks on multicore ARM Cortex-A53 systems. He will offer a look at Carbon System Exchange and explain how it can be used for IP selection, IP optimization, subsystem optimization, system bring-up, and system optimization.

For more information about Carbon Design Systems or Carbon Systems Exchange, visit: www.carbondesignsystems.com.

Details on ARM TechCon can be found at: http://tiny.cc/pc2olx

About Carbon Design Systems

Carbon Design Systems solutions enable virtual prototype productivity within minutes of download. Carbon virtual prototypes can execute at hundreds of MIPS and with 100% accuracy to enable software optimization and performance analysis as well as firmware and driver development. Carbon's customers are systems, semiconductor, and IP companies that focus on wireless, networking, and consumer electronics. Carbon investors include Samsung Venture Investment Corporation and ARM Holdings. Carbon is headquartered at 125 Nagog Park, Acton, Mass., 01720. Telephone: (978) 264-7300. Facsimile: (978) 264-9990. Email: Email Contact. Website: www.carbondesignsystems.com.

Carbon Design Systems is a registered trademark of Carbon Design Systems Inc. Carbon Model Studio and Carbon SoCDesigner are trademarks of Carbon Design Systems. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

ARM and AMBA are registered trademarks of ARM Limited.

For more information, contact:
Bill Neifert
Vice President of Business Development
Carbon Design Systems
(978) 264-7302

Email Contact 

Nanette Collins
Public Relations 
Carbon Design Systems
(617) 437-1822

Email Contact 





Review Article Be the first to review this article
CST: Webinar November 9, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise