MoSys Announces Industry’s Lowest Power 100G Full Duplex Retimer IC for Small Form Factor Optics Modules and Networking Line Cards

LineSpeed™ 100G Low Power Retimer Supports IEEE and OIF Standards and CFP2, CFP4 and QSFP28 Module Form Factors Used in Carrier, Enterprise, and Data Center Applications

SANTA CLARA, Calif. — (BUSINESS WIRE) — September 15, 2014MoSys (NASDAQ: MOSY), a leader in semiconductor solutions that enable fast, intelligent data access for network and communications systems, today announced its new LineSpeed™ 100G Low Power Retimer integrated circuit (IC) for next-generation networking and communications systems. The full-duplex quad retimer device supports CFP2, CFP4 and QSFP28 module CDR requirements with a single chip and delivers a strong self-adapting receive equalization for ease of connection and improved signal integrity for up to 20dB of insertion loss. The device features the industry’s lowest power dissipation at 700mW, small full-duplex footprint, reference-free operation, integrated system and line side loopbacks, and on-chip PRBS generation, error checking, eye monitor and diagnostic capabilities using the MoSys IC Spotlight™ Analyzer.

The LineSpeed MSH110 IC is a single chip, CMOS device designed to support IEEE 802.3ba and OIF CEI-3.0 electrical standards. Specifically optimized for low-power 100G module and line card applications, the MSH110 device optimizes performance, space and power for 100G modules and line cards used in data center, enterprise or service provider systems. The device supports Ethernet and OTN baud rates ranging from 24 - 28 Gbps and includes adaptive equalization to support applications ranging from CEI-28G-VSR to CEI-28G-MR (up to 20dB insertion loss). The device has eight independent channels, each consisting of a receiver connected to a corresponding transmitter. Data can be input and output on all eight channels simultaneously.

Key Features:

  • Supports 100G IEEE and OTN standards and module form factors (CFP2, CFP4, QSFP28)
  • Optimized for ultra low power and integration
    • Industry lowest power - 700mW
    • High integration - full duplex 100G (8 CDRs)
  • Ease of use for OEM and carriers
    • Self adapting Rx equalization simplifies connectivity
    • Equalization supports up to 20dB for improved signal integrity, margin and distance Tx equalization for flexibility
    • Extensive test features, including internal loopbacks, PRBS generation / checking, eye monitor
    • Lane swapping and lane duplication features
  • Design simplicity
    • Reference-free option (includes both reference and reference-free modes)
    • Leverage common CDR platform across optical standards
    • Small form factor 8x8mm FCCSP

“In the productization of 100G module and line card solutions for systems ranging from 100s of Gigabits to terabits per second, challenges in power, ease of connectivity, signal integrity, testability, economics and footprint must be met in order to enable mass deployment," stated John Monson, VP of sales and marketing at MoSys. “The LineSpeed 100G Ultra Low Power retimer leverages CMOS technology to address these challenges with the industry’s lowest power consumption and highest integration, self-adapting receive equalization for quick connection and robust operation, and extensive self-test and loopback features for system testability.”

MoSys' MSH110 LineSpeed 100G Low Power Retimer product is offered in an 8mm x 8mm FCCSP package and sampling to early technology partners now. For information about evaluation platforms, availability and pricing, contact a local MoSys sales representative at http://www.mosys.com/contact.php.

About MoSys, Inc.

MoSys, Inc. (NASDAQ: MOSY) is a fabless semiconductor company enabling leading equipment manufacturers in the networking and communications systems markets to address the continual increase in Internet users, data and services. The company's solutions deliver data path connectivity, speed and intelligence while eliminating data access bottlenecks on line cards and systems scaling from 100G to multi-terabits per second. Engineered and built for high-reliability carrier and enterprise applications, MoSys' Bandwidth Engine® and LineSpeed™ IC product families are based on the company's patented high-performance, high-density intelligent access and high-speed serial interface technology, and utilize the company's highly efficient GigaChip™ Interface. MoSys is headquartered in Santa Clara, California. More information is available at www.mosys.com .

1 | 2  Next Page »



Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy