Mentor Graphics Announces its Membership in the European Centre for Power Electronics Consortium

WILSONVILLE, Ore., Aug. 28, 2014 — (PRNewswire) — Mentor Graphics Corporation (NASDAQ: MENT) today announced its new membership in the German-based European Centre for Power Electronics (ECPE), a European consortium focused on the research, education, technology transfer, and promotion of power electronics globally.  Mentor Graphics is the only electronic design automation (EDA) company represented in this industry-driven research network, comprised of over 150 organizations (75 companies and 76 institutions).  Mentor Graphics was selected as an ECPE member due to its unique expertise in both thermal simulation and test solutions including electronic components power cycling for reliability prediction, as evidenced by its recently announced MicReD® Industrial Power Tester 1500A technology.

Mentor Graphics logo.

The key initiatives of the ECPE are to provide global research on power electronics systems; educate the ECPE member network and electronic engineering industry on advancements via workshops and tutorials; and serve as the "unified voice" for the European power electronics industry.  In contributing to the ECPE, Mentor Graphics will focus on its expertise in thermal simulation and test of electronic systems and power cycling technology, which will provide value to the 150+ organizations in this research network.  Member companies of the ECPE, such as ABB, Siemens, Fraunhofer, Bosch, ST Microelectronics, Valeo, Infineon and Daimler, will be able to access, share, and apply knowledge on innovative technologies such as the MicReD Power Tester system. Dr. John Parry, electronics industry manager for Mentor Graphics Mechanical Analysis Division, has been appointed to represent Mentor Graphics within the ECPE. Parry is active in the electronics market, having served as the general chairman of SEMI-THERM 21 and currently represents Mentor Graphics on the JEDEC committee on global thermal standards for the microelectronics industry.

"I have seen many in-house realizations of a power tester system. Compared to those solutions, the MicReD Industrial Power Tester 1500A from Mentor Graphics is a fully-featured professionally- packaged system," stated Thomas Harder, general manager of the European Centre for Power Electronics. "Mentor's Power Tester detects changes in the thermal stack together with relevant electrical properties during cycling, allowing the evolution of the competing damage mechanisms to be understood."

"We are honored to have been selected as the only EDA member of the ECPE organization based on our reputation as the only technology company providing both thermal simulation and testing capabilities, particularly power electronics reliability prediction," stated Roland Feldhinkel, general manager of Mentor Graphics Mechanical Analysis Division. "We foresee tremendous advancements in electronics product lifecycle management by introducing ECPE members to Mentor's thermal management and verification technologies. Ultimately, from our collaboration with both commercial and research ECPE members, manufacturers will be able to create longer lasting electronics products that will minimize warranty costs."

About the European Centre for Power Electronics Organization
The ECPE Network with the registered association, ECPE European Center for Power Electronics e.V, was founded in 2003 by eight industrial enterprises as an industry-driven Research Network for Power Electronics in Europe. The network is comprised of 75 member companies. Furthermore, 76 European universities and research institutes are integrated in the network as so-called "Competence Centres." Its mission is to promote education, innovation, science, research and technology transfer in the area of Power Electronics in Europe. To learn more, visit the website:  http://www.ecpe.org/

About Mentor Graphics
Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months in excess of $1.15 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, Mentor and MicReD, are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)                        

For more information, please contact:
Larry Toda
Mentor Graphics
503.685.1664
Email Contact 

Logo - http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO

SOURCE Mentor Graphics Corporation

Contact:
Mentor Graphics Corporation
Web: http://www.mentor.com/




Review Article Be the first to review this article
CST Webinar Series

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy