Toshiba Launches Multi-function ARM® Cortex®-M0-core-based Microcontroller with Low Pin Count

TOKYO — (BUSINESS WIRE) — August 26, 2014Toshiba Corporation (TOKYO:6502) today announced the launch of a new microcontroller, “TMPM037FWUG”, as the latest addition to its ARM® Cortex®-M0-core-based TX00 series. The microcontroller is designed for motor control applications in equipment such as MFPs (multifunction printers) and printers. Sample shipments start today.

Toshiba: Multi-function ARM(R) Cortex(R)-M0-core-based microcontroller "TMPM037FWUG" with low pin co ...

Toshiba: Multi-function ARM(R) Cortex(R)-M0-core-based microcontroller "TMPM037FWUG" with low pin count (Photo: Business Wire)

The development of highly sophisticated motor control applications in equipment such as MFPs and printers requires various functions, including multiple communication channels that can communicate with the main control device and peripheral devices, interfaces for reading numerical values from sensors, and a timer function that can output pulses to control a motor, such as a stepping motor or DC motor.

While having a lower pin count, the new microcontroller integrates a 6-channel serial interface, an 8-channel 10-bit A/D converter and a 10-channel timer with a Programmable Pulse Generator (PPG). This eliminates the need for parts such as interface extension ICs and also contributes to lower manufacturing cost. The microcontroller also has a bit-band processing function that supports access and control of specific bits. This increases bit manipulation efficiency and allows optimization of the product’s small-capacity flash memory.

Using the same ARM® Cortex®-M-core as the TX03 and the TX04 series, TMPM037FWUG can improve efficiency and reduce the cost by sharing the development tools for the main control device of medium to large systems.

Applications

  • MFPs and Printers
  • Consumer electronics
  • Digital equipment
  • Factory automation equipment

Key Features of the New Product

  • CPU:ARM® Cortex®-M0 ; Maximum operating frequency is 20 MHz
  • Low pin count: 64 pins
  • 8-channel 10-bit AD converter, which can convert signals from various sensors.
  • 5-channel SIO/UART, which can communicate with the main control device and the peripheral devices.
  • 10-channel 16-bit timer, which can be used for controlling motors such as stepping motors and DC motors.
 

Main Specifications

Part number   TMPM037FWUG

Sample price (Tax included)

300 yen
Main
specifications
  CPU ARM® Cortex®-M0
Maximum
operating frequency
20MHz
Internal

memory

Flash 128 Kbytes
SRAM 16 Kbytes

Operating
voltage
2.3V to 3.6V
10-bit ADC 8 ch
DMA 1 unit
16-bit timer 10 ch
SIO/UART 5 ch
I 2 C 1 ch
Package Type(size) LQFP64 (10mm x 10mm)
Pins 64
Pin pitch 0.5mm
Note   DMA: Direct Memory Access

Calculated based on a formula of 1KB equals 1,024 bytes.

 

1 | 2  Next Page »



Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy