Ziptronix and EV Group Demonstrate Submicron Accuracies for Wafer-to-Wafer Hybrid Bonding

RESEARCH TRIANGLE PARK, NC -- (Marketwired) -- May 27, 2014 -- Ziptronix Inc. and EV Group ("EVG") today announced they have successfully achieved submicron post-bond alignment accuracy on customer-provided 300mm DRAM wafers. The results were achieved by implementing Ziptronix's DBI® Hybrid Bonding technology on an EVG Gemini® FB production fusion bonder and SmartView®NT bond aligner. This approach can be used to manufacture fine-pitch 3D ICs for a variety of applications including stacked memory, advanced image sensors and stacked systems-on-chip (SoCs).

"The performance of DBI Hybrid Bonding technology is not limited by connection pitch, but requires the right alignment and placement tool with an ability to scale that has been a challenge to find until now," said Paul Enquist, CTO and VP Engineering at Ziptronix. "EVG's fusion bonding equipment has been optimized to achieve consistent submicron post-bond alignment accuracy. This advancement in alignment accuracy provides a clear path to high-volume manufacturing (HVM) of our technology."

Pitch scaling on next-generation 3D technologies is expected to continue for many years to come. Fine-pitch hybrid bonding is already in use in high-performance 3D memory products, and has been announced for HVM of 3D image sensors. DBI Hybrid Bonding can be used at the die or wafer level; however, wafer-level bonding enables a great cost benefit by bonding all the die at once. With much of the processing for DBI Hybrid Bonding taking place at wafer scale, there is the added benefit of low cost-of-ownership.

"Demonstrating submicron accuracy is critical to achieving fine-pitch connections in HVM for a wider variety of applications," said Paul Lindner, Executive Technology Director at EVG. "As the industry pushes to realize 3D ICs, joint efforts such as our work with Ziptronix to develop manufacturing approaches offer customers a tremendous value-add."

Ziptronix Direct Bond Interconnect (DBI®) Hybrid Bonding is a conductor/dielectric bonding technology that includes a variety of metal/oxide and/or nitride combinations, does not use adhesives and is currently the most suitable for volume manufacturing in the marketplace. It allows for strong, room temperature dielectric bonding, low temperature conductive bonding and finer-pitch interconnect over Cu/Cu or other metal bonding because the bond occurs between both the dielectric and the conductive surfaces, which effectively bonds the entire substrate interface area.

EVG's SmartView®NT Automated Bond Alignment System for Universal Alignment offers a proprietary method of face-to-face wafer-level alignment, which is key to achieving the required accuracy in multiple wafer stacking for leading-edge technologies. In addition to improving alignment capabilities on its SmartView®NT bond aligner to reach submicron accuracies, EVG has optimized it so that surfaces can be prepared simultaneously for bonding, electrical connectivity and mechanical strength.

The companies will showcase this technology at ECTC 2014, from May 27-30, 2014, in Lake Buena Vista, Florida. To learn more about Ziptronix DBI Hybrid Bonding visit booth #121 and for information on EVG Equipment Solutions for Fusion Bonding visit booth #413.

About Ziptronix
A pioneer in the development of low-temperature direct bond technology, Ziptronix offers patented technology for wafer- or die-level bonding. Its ZiBond® Direct Bonding and DBI® Hybrid Bonding technologies deliver the industry's most scalable, manufacturable and lowest total cost-of-ownership solutions for 3D stacking. The company's intellectual property has been licensed for a variety of semiconductor applications including BSI sensors, RF front ends, pico-projectors, memories and 3D integrated circuits. Founded in 2000 as a venture-backed spinoff of RTI International, the company has been issued more than 40 U.S. patents and more than 35 international patents, with more than 50 U.S. and international patent applications pending. www.ziptronix.com.

About EV Group (EVG)
EV Group (EVG) is a leading supplier of equipment and process solutions for the manufacture of semiconductors, microelectromechanical systems (MEMS), compound semiconductors, power devices, and nanotechnology devices. Key products include wafer bonding, thin-wafer processing, lithography/nanoimprint lithography (NIL) and metrology equipment, as well as photoresist coaters, cleaners and inspection systems. Founded in 1980, EV Group services and supports an elaborate network of global customers and partners all over the world. More information about EVG is available at www.EVGroup.com.





Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy