IXYS Introduces the PIM-Mini 5A to 200A Miniature Pulsed Laser Diode Driver

FORT COLLINS, Colo. — (BUSINESS WIRE) — April 15, 2014 — IXYS Corporation (NASDAQ: IXYS), a leader in power semiconductors, mixed-signal and digital ICs for power conversion and motion control applications, announced today the introduction of the compact and lightweight PIM-Mini by its IXYS Colorado division. The PIM-Mini is an air-cooled pulsed current source designed to drive laser diodes, bars, arrays, or any low-impedance load.

Offered in models from 5 amperes to 200 amperes of peak current at up to 48 volts forward voltage, the PIM-Mini has been optimized for OEM designs including industrial, chemical processing and medical applications. Its size and flexibility makes it ideal for research, laboratory, scientific and other applications requiring a compact and economical high-performance pulsed driver.

Pulse widths are adjustable from 25 microseconds to 8,750 microseconds (maximum pulse width varies by model), with a pulse repetition frequency up to 20 hertz. Output current is set with an internal potentiometer or an analog voltage. The pulse width is controlled with the input trigger signal. It requires two DC voltages for operation, 12 volts support power and a compliance voltage equal to 12 volts above the laser diode’s forward voltage.

PIM-Mini Features:

  • Five models available with maximum output current of 5, 10, 20, 50 and 200 amperes
  • Rise and fall times of 5 to 10 microseconds, depending upon model
  • Pulse widths from 25 to 8,750 microseconds (maximum pulse width varies by model)
  • Drives both single diodes and arrays with forward voltages up to 48 volts
  • Miniature air-cooled module just 4.425” H x 4.975” W x 2.125” D (112 x 126 x 54 millimeters) in size, ideal for OEM applications
  • 12 volt DC support power – no AC mains input needed
  • RoHS compliant

“We are excited to be releasing the PIM-Mini, the next product in our strategy to provide our customers with pulser solutions covering all requirements from R&D and laboratory bench top systems to application-specific OEM solutions,” said Stephen Krausse, General Manager of IXYS Colorado/DEI. “Leveraging our pulse power solutions and design expertise provides our customers with the competitive advantages of a shortened time-to-market and optimal performance of their end products.”

The PIM-Mini is available directly from IXYS Colorado (Directed Energy) Tel. (970) 493-1901, Fax (970) 232-3025, Email sales@ixyscolorado.com, http://www.ixyscolorado.com or through your local authorized IXYS/IXYSRF sales representative.

About IXYS

IXYS Corporation develops and markets primarily high performance power semiconductor devices that are used in controlling and converting electrical power efficiently in power systems for the telecommunication internet infrastructure, motor drives, medical systems, solar energy, wind energy, electrical generators and transportation. IXYS also serves its markets with a combination of digital and analog integrated circuits, RF power products and power subsystems including application-specific, embedded system-on-chip (SoC) solutions for the industrial and consumer markets.

Safe Harbor Statement

Any statements contained in this press release that are not statements of historical fact, including the performance, rating, availability, reliability, operation and suitability of products for various applications, may be deemed to be forward-looking statements. There are a number of important factors that could cause the results of IXYS to differ materially from those indicated by these forward-looking statements, including, among others, risks detailed from time to time in the Company's SEC reports, including its Form 10-Q for the fiscal quarter ended December 31, 2013. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements.



Contact:

IXYS Corporation
Jacque Laguna, 970-493-1901
Email Contact




Review Article Be the first to review this article
Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Job Openings: Can EDA Predict the Future
More Editorial  
Jobs
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer Germany/UK for EDA Careers at San Jose, CA
Timing Design Engineer(Job Number: 17001757) for Global Foundaries at Santa Clara, CA
ASIC Design Engineer 2 for Ambarella at Santa Clara, CA
Senior FPGA Designer for Fidus Electronic Product Development at Fremont, CA
Upcoming Events
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
DVCon 2017 China, April 19, 2017, Parkyard Hotel Shanghai, China at Parkyard Hotel Shanghai Shanghai China - Apr 19, 2017
Zuken Innovation World 2017 at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy