PRO DESIGN Completes FPGA based Prototyping Portfolio with proFPGA Uno V7 System

MUNICH — (BUSINESS WIRE) — February 24, 2014 — PRO DESIGN today announced the launch of its new proFPGA uno Virtex 7 FPGA based Prototyping system, a very compact, modular and cost optimized solution for IP verification and pre-silicon software development.

proFPGA uno V7 IP Prototyping System (Photo: Business Wire)

proFPGA uno V7 IP Prototyping System (Photo: Business Wire)

The new IP development platform consists of the proFPGA uno motherboard and various pluggable FPGA modules. The unique feature of the proFPGA solution is, that the user can choose between various proFPGA V7 FPGA Modules, assembled with different Xilinx Virtex 7 FPGA devices like the XC7VX330T, the XC7V585T, the XC7VX690T or XC7V2000T which vary widely in capacity, number and performance of high speed serial transceivers.

The big advantage of the proFPGA concept is its modularity. The user can for example use the proFPGA uno system for IP or design parts development and can reuse the proFPGA FPGA modules for complete SoC and ASIC prototyping by simply plugging the same and proFPGA V7 FPGA modules on a proFPGA duo or quad motherboard. This innovative technology and methodology offers maximum reusability and highest return on invest.

Assembled with a proFPGA Xilinx Virtex 7 XC7V2000T FPGA module the uno system offers a capacity of up to 12 M ASIC gates and 8 extension sites, with a total of up to 1100 free FPGA I/Os for adapting standard proFPGA daughter boards or application specific extension boards like DDR3 memory, USB 3.0, GB Ethernet or PCIe Gen3.

Because of the compact system architecture and the high-end PCB layout with length matched signal lines the proFPGA uno system offers best in class signal integrity and maximum system speed of up to 400 MHz. Over the standard I/Os a single ended point to point performance of up to 1.0 Gb/s and 13.1 Gb/s over the Multi-Gigabit Transceivers can be achieved.

The system comes with the proFPGA Builder software, which provides an extensive set of features, like an advanced clock management, integrated self- and performance test, automatic board detection, I/O voltage programming, system scan- and safety mechanism and remote system configuration in seconds via USB, or Ethernet which extraordinarily simplifies the usage of the proFPGA system.

Availability and Price

The proFPGA uno V7 system is available now and the starting price is US$ 9.900,-

Demonstration

DVCon2014 in San Jose at booth #104, March 3 – 5, 2014.

More information under: www.proFPGA.com



Contact:

PRO DESIGN
Gunnar Scholl
Tel: +4980628080
Email Contact




Review Article Be the first to review this article
CST: Webinar November 9, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Teklatech: Work smart, Not hard
More Editorial  
Jobs
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
The 2017 International Test Conference at Fort Worth Convention Center Fort Worth TX - Oct 31 - 2, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise