Research and Markets: Additive Manufacturing Opportunities in the Aerospace Industry: A Ten-Year Forecast

DUBLIN — (BUSINESS WIRE) — February 20, 2014Research and Markets ( http://www.researchandmarkets.com/research/vrtt5s/additive) has announced the addition of the "Additive Manufacturing Opportunities in the Aerospace Industry: A Ten-Year Forecast" report to their offering.

The aerospace is regularly discussed as one of the largest opportunities for additive manufacturing (AM) over the next decade. These discussions point to the sizeable demand in the aerospace industry for high-value, metal parts that are as complex as they are compact. This demand creates large opportunities to design, produce, and supply parts manufactured with AM processes to an industry with fat pockets.

The aerospace industry exhibits a number of characteristics that have 3D entrepreneurs licking their chops. AM has the potential to improve supply chain paradigms, minimize replacement part inventories, and streamline production processes. In fact, many AM companies recognize these opportunities and are racing to provide products that can serve latent demand in the aerospace industry.

This report identifies the profitable opportunities of AM applications in aerospace industry. More than merely speculating on what AM can do in the aerospace industry, this report focuses down on exactly where and how AM will be implemented in the aerospace industry supply chain and business activities. Readers of the report will gain an in-depth understanding of what AM means to the aerospace industry, as well as a comprehensive framework for understanding new developments in the industry.

Each chapter of the report breaks down one of the three specific sectors of the aerospace industry that will be affected by AM over the next ten years: commercial aviation, military aircraft, and spacecraft. Each chapter provides critical analysis through an exploration of the processes, software, materials, services, and major players active in the industry. This report also provides the reader with a clear understanding of technological progress, market size, time to market, and associated risks for the multi-million dollar opportunities for AM in aerospace.

This report also analyzes the largest AM equipment manufacturers likely to supply the industry. Product portfolios are strategically analyzed to offer insight on how the specific technologies behind AM systems will affect their adoption in the aerospace industry.

This report contains ten years forecasts on AM equipment, materials, software, services, and opportunities in the aerospace sector. These forecasts are collected from an exhaustive number of interviews conducted with professionals in the aerospace and AM industries. Detailed forecasts allow business executives to stand on solid ground when crafting strategy, as well as confirm internally generated numbers with a reputable outside source.

This report will provide invaluable guidance for material, software, and equipment manufacturing companies in the aerospace industry, 3D printing industry, and other related sectors. We also think that this report will be required reading for investors examining aerospace industry opportunities.

Key Topics Covered:

Chapter One: Intro

Chapter Two: Current Applications for Additive Manufacturing in Commercial Aviation

2.1 Viable Substitutes For Complex Sub-Assemblies

2.2 Weight Reduction In Cabin Parts

2.3 Ameliorating The Supply Chain For Replacement Parts

2.4 Super Plastics As A Substitute For Small Metal Parts

2.5 Functional Prototypes As A Competitive Advantage

2.6 Next Level Integration AM-enabled Designs Into Airplane Designs

2.7 Coping With Exacting Materials and Part Performance Requirements

Chapter Three: Additive Manufacturing in Military Applications

3.1 Streamlining Development and Cycles and Combating Technological Crawl

3.2 Low-Volume Manufacturing Could Usher In New Production Paradigms

3.3 Specific Applications in Military

3.4 AM In Combat Settings

Chapter Four: Current Applications for Additive Manufacturing (AM) in Space Industry

4.1 One-off Parts And Their Drag On The Economics of Space Travel

4.2 Functional Prototyping Reduces Development Times

4.3 Materials Cleared For Use In Space

4.4 3D Printers In Space

Chapter Five: Analysis of Key AM Equipment Manufacturers

5.1 3D Systems

5.2 Ex-One

5.3 GE

5.4 Arcam

5.5 Concept Laser

5.6 EOS

5.7 Renishaw

5.8 SLM Solutions

5.9 Trumpf

5.10 Sciaki


1 | 2  Next Page »



Review Article Be the first to review this article
CST Webinar Series

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Upcoming Events
2016 IEEE International Electron Devices Meeting at Hilton San Francisco Union Square 333 O’Farrell Street San Francisco CA - Dec 3 - 7, 2016
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy