L-3 Cincinnati Electronics Selects Cypress to Manufacture Readout Integrated Circuits for Thermal Imaging Applications

Cypress Foundry Solutions Chosen for High-Yield SONOS Process Technology Expertise in “Stitching” Oversized Dice from Wafers

SAN JOSE, Calif. & MASON, Ohio — (BUSINESS WIRE) — January 22, 2014 — Cypress Semiconductor Corp. (NASDAQ: CY) today announced it has been selected by L-3 Cincinnati Electronics, a division of L-3 Communications (NYSE: LLL), as a supply partner to manufacture its Readout Integrated Circuits (ROICs). L-3 CE will design and manufacture its state-of-the-art ROICs for its cooled infrared detectors using Cypress’s proprietary process technology at the Cypress Foundry Solutions wafer fabrication facility in Bloomington, Minnesota. L-3 CE selected Cypress based on the potential for significant manufacturing yield enhancements for large-die ROIC devices.

The ROICs will be based on Cypress’s S8™ mixed-signal 130-nanometer flash-based SONOS (Silicon Oxide Nitride Oxide Silicon) process technology. SONOS is compatible with standard CMOS technologies and offers numerous advantages, including high endurance and low power.

Due to the large die size of infrared sensor ROICs, L-3 CE looked for a manufacturing partner that could provide the lowest percentage of defects for higher yield. L-3 CE also wanted a partner with proven expertise in “stitching,” or the ability to process dice larger than standard stepper wafer handling equipment can handle. Cypress meets these requirements by combining its 130-nm mixed-signal front-end process with the low-defect density and design rules for precise stitching of its 90-nm aluminum back-end of line process.

“Based on Cypress's comprehensive defect control strategy, we are pleased to expand our supplier base to meet the growing demand for large-format thermal imaging,” said Vance King, Vice President and General Manager of IR Products at L-3 Cincinnati Electronics. “Our cutting-edge, high-definition sensing technology, combined with Cypress’s proven, high-volume 8-inch 130-nm technology and manufacturing expertise, enables us to achieve the performance and affordable cost requirements of U.S. defense markets.”

“This agreement continues to validate Cypress’s commitment to high-quality, low-cost manufacturing in the United States,” said Mehran Sedigh, Vice President of Front-End Manufacturing at Cypress. “We have continued to expand our base of leading-edge customers, such as L-3, for our Minnesota wafer fab, and we expect this trend to continue as more companies see the value and service that Cypress Foundry Solutions offers.”

The agreement will leverage Cypress’s advanced process technology and transfer expertise along with its Trusted Fab accreditation and quality certifications for TS16949 and ISO14001. L-3 CE and Cypress expect to have the product qualified by late 2014.

Cypress manufactures high-performance, mixed-signal, programmable solutions for a variety of markets, including defense and automotive, proving a strong fit for L-3 CE, a leader in infrared solutions for military and commercial applications.

Learn More About Cypress

About L-3 Cincinnati Electronics

L-3 Cincinnati Electronics (L-3 CE) is world-renowned for its expertise in the areas of electro-optical/infrared (EO/IR) detection as well as space and missile electronics. To learn more about L-3 CE, please visit the company’s website at www.L-3com.com/ce.

About L-3 Communications

Headquartered in New York City, L-3 employs approximately 51,000 people worldwide and is a prime contractor in C3ISR (Command, Control, Communications, Intelligence, Surveillance and Reconnaissance) systems, platform and logistics solutions, and national security solutions. L-3 is also a leading provider of a broad range of electronic systems used on military and commercial platforms. The company reported 2012 sales of $13.1 billion.

To learn more about L-3, please visit the company’s website at www.L-3com.com. L-3 uses its website as a channel of distribution of material company information. Financial and other material information regarding L-3 is routinely posted on the company’s website and is readily accessible.

About Cypress’s Fab 4

Cypress operates its own wafer fabrication facility in Bloomington, Minnesota, and offers access to this facility as a Specialty Foundry Solutions provider. This 8-inch wafer fab manufactures in high volume down to the 90-nm node with 65-nm capability. It offers process technologies that integrate SONOS-based nonvolatile memory and precision analog/mixed-signal capabilities. The facility can handle ITAR material, and it has been accredited as a Category 1A Trusted Fab for fabrication, design, and testing of U.S. DoD Trusted Microelectronics. More information on Cypress Foundry Solutions is available online at www.cypress.com/go/foundry.

About Cypress

Cypress delivers high-performance, mixed-signal, programmable solutions that provide customers with rapid time-to-market and exceptional system value. Cypress offerings include the flagship PSoC <

1 | 2  Next Page »



Review Article Be the first to review this article
CST: Webinar November 9, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise