Dr. Cliff Hou to Keynote at 51st Design Automation Conference (DAC)

TSMC VP of R&D to discuss industry opportunities in sub-10nm era

LOUISVILLE, Colo. — (BUSINESS WIRE) — January 16, 2014 — Cliff Hou, PhD, will be a keynote presenter in June 2014 at the Design Automation Conference (DAC), the premier conference devoted to the design and automation of electronic systems. Dr. Hou will discuss how the introduction of 10nm and 7nm processes will alter today’s ecosystem while opening greater EDA and IP opportunities, and will present new system and chip designs. The 51st DAC will be held at the Moscone Convention Center in San Francisco, California from June 1-5, 2014.

Dr. Hou will highlight how continued chip- and wafer-based scaling will deliver the power and performance necessary to deliver wondrous new applications. A grand alliance of design ecosystem, equipment and material suppliers will result in production at 10nm and heterogeneous silicon integration that combines chips from multiple process technologies with 3D packaging to deliver compelling economics for a “System in a Si Superchip.” He will discuss the new design techniques and system and chip design challenges likely to be faced by the electronics design and supply ecosystem, outlining the need for even greater levels of collaboration and cooperation.

“Industry Opportunities in the Sub-10nm Era” will be presented at 3:00pm on Monday, June 2, 2014 at DAC.

Along with exciting keynotes, DAC 2014 will feature three new tracks focused on Automotive, Intellectual Property (IP) and Security, while keeping the tradition of offering the best-in-class solutions that promise to advance electronic design automation (EDA) and embedded systems and software (ESS).

As the primary venue for the design and automation of electronic systems, DAC offers outstanding training, education, exhibits and superb networking opportunities for designers, researchers, tool developers and vendors. For more information visit www.dac.com

About Dr. Hou

Dr. Cliff Hou was appointed in 2011 as TSMC’s Vice President of R&D. He joined TSMC in 1997. He was previously a Senior Director for Design and Technology Platform, where he established the company’s technology design kit. He also led TSMC’s in-house IP development teams from 2008 to 2010.

Before TSMC, Dr. Hou was with Taiwan’s national telecommunications laboratory, ITRI/CCL, where he worked in front-end design environment development and as a consultant specializing in physical verification methodologies. Dr. Hou served as an Associate Professor at Kaohsiung Polytechnic Institute in Taiwan.

Dr. Hou holds 20 U.S. Patents and serves as a board member of Global Unichip Corp. He received his B.S. degree in control engineering from Taiwan’s National Chiao-Tung University, and Ph.D. in electrical and computer engineering from Syracuse University.

About DAC

The Design Automation Conference (DAC) is recognized as the premier event for the design of electronic circuits and systems and for electronic design automation (EDA) and silicon solutions. Since 1964, a diverse worldwide community of many thousands of professionals has attended DAC. They include system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives as well as researchers and academicians from leading universities. Close to 60 technical sessions selected by a committee of electronic design experts offer information on recent developments and trends, management practices and new products, and methodologies and technologies. A highlight of DAC is its exhibition and suite area featuring leading and emerging EDA, silicon, intellectual property (IP) automotive, security and design services providers. The conference is sponsored by the Association for Computing Machinery (ACM), the Electronic Design Automation Consortium (EDA Consortium), and the Institute of Electrical and Electronics Engineers (IEEE), and is supported by ACM's Special Interest Group on Design Automation (ACM SIGDA).

Design Automation Conference acknowledges trademarks or registered trademarks of other organizations for their respective products and services.


Design Automation Conference
Michelle Clancy, 1-303-530-4334
Email Contact

Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Technical Support Engineer for EDA Careers at Freemont, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
EDI CON China 2017! at Shanghai Convention & Exhibition Center of International Sourcing (SHCEC) No.2739 West Guangfu Road Putuo District, Shanghai (200062) China - Apr 25 - 27, 2017
2017 SEMICON Southeast Asia at SPICE Arena Penang Malaysia - Apr 25 - 27, 2017
2017 IoT Developers Conference at Santa Clara Convention Center California - Apr 26 - 27, 2017
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy