Cimatron Eliminating Human Error in Mold Design

Software's mold making capabilities to be demonstrated at Euromold

GIVAT SHMUEL, Israel, November 27, 2013 — (PRNewswire) —

Cimatron Limited (NASDAQ: CIMT) today announced that CimatronE 11, the latest version of its integrated CAD/CAM software, will be demonstrated at the Euromold trade show, Frankfurt/Main, Germany, from December 3-6, 2013.

"Some of the biggest frustrations that mold makers can face are the human errors that can creep into almost all aspects of mold design and programming," said Mr Dirk Dombert, Cimatron's General Manager for Germany.

"The smallest error in the mold's design or the machining process can have severe consequences, impacting a shop's ability to meet customer deadlines, in addition to curtailing project profitability.

"Aside from ongoing staff training, human error can also be reduced or eliminated through the adoption of intelligent CAD/CAM process-driven software systems, such as CimatronE. Such systems utilize powerful automation and analysis tools, and incorporate advanced techniques and simulations to prevent the possibility of human error. Even if a mistake does occur, it is identified early on in the process, well before the mold is ready to be machined."

Key features of CimatronE that help to eliminate human error include:

  • Analysis tools: ECO, wall thickness, cooling and channel, plastic flow, parting, etc.
  • Reliable DI: automatic data validation and the ability to easily heal and stitch data.
  • Parting tools: detection of problematic areas (e.g. undercuts) early on in the design.
  • Smart use of catalogs: automatic cut by catalog components.
  • Motion analysis and collision detection: powerful design validation.
  • Intelligent NC process management: error-free toolpath creation, with full geometric associativity and tight control over remaining stock.
  • Automated drilling: tools for gouge prevention while drilling and collision prevention during connections.
  • Simulation and posts: confident machining with simulation of kinematics and toolpath motion, and access to a rich library of post processors for error-free machining.
  • For a one-on-one demonstration of these capabilities in CimatronE, visit the Cimatron booth (Hall 8, Booth F70) at Euromold.
  • Also on show at the Cimatron booth will be the GibbsCAM product line supporting 2-5 axis milling, turning, mill/turning, multi-task simultaneous machining and wire-EDM.

About Cimatron

With over 30 years of experience and more than 40,000 installations worldwide, Cimatron is a leading provider of integrated, CAD/CAM software solutions for mold, tool and die makers as well as manufacturers of discrete parts. Cimatron is committed to providing comprehensive, cost-effective solutions that streamline manufacturing cycles and ultimately shorten product delivery time.

The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions for mold design, die design, electrodes design, 2.5 to 5 axes milling, wire EDM, turn, mill-turn, rotary milling, multi-task machining, and tombstone machining. Cimatron's subsidiaries and extensive distribution network serve and support customers in the automotive, aerospace, medical, consumer plastics, electronics, and other industries in over 40 countries worldwide.

Cimatron's shares are publicly traded on the NASDAQ under the symbol CIMT. For more information, visit http://www.cimatron.com

This press release includes forward looking statements, within the meaning of the Private Securities Litigation Reform Act of 1995, which are subject to risk and uncertainties that could cause actual results to differ materially from those anticipated. Such statements may relate to Cimatron's plans, objectives and expected financial and operating results. The words "may," "could," "would," "will," "believe," "anticipate," "estimate," "expect," "intend," "plan," and similar expressions or variations thereof are intended to identify forward-looking statements. Investors are cautioned that any such forward-looking statements are not guarantees of future performance and involve risks and uncertainties, many of which are beyond Cimatron's ability to control. The risks and uncertainties that may affect forward looking statements include, but are not limited to: currency fluctuations, global economic and political conditions, marketing demand for Cimatron products and services, long sales cycles, new product development, assimilating future acquisitions, maintaining relationships with customers and partners, and increased competition. For more details about the risks and uncertainties related to Cimatron's business, refer to Cimatron's filings with the Securities and Exchange Commission. Cimatron cannot assess the impact of or the extent to which any single factor or risk, or combination of them, may cause. Cimatron undertakes no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise.

For More Information Contact:

Ilan Erez
Chief Financial Officer  
Cimatron Ltd.    
Phone: +972-73-237-0114
Email: Email Contact

Idit Pass Lagziel
Marketing Manager
Cimatron Ltd.
Phone: +972-73-237-0298
Email: Email Contact

Investor Relations contact:
Ehud Helft/Kenny Green
CCG Investor Relations
Tel: (US) 1-646-201-9246
Email: Email Contact

SOURCE Cimatron LTD

Contact:
Cimatron LTD




Review Article Be the first to review this article
CST Webinar Series

True Circuits:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
2016 IEEE International Electron Devices Meeting at Hilton San Francisco Union Square 333 O’Farrell Street San Francisco CA - Dec 3 - 7, 2016
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: UltraPLL



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy