STMicroelectronics LSM333D 4x4mm 9-Axis IMU Reverse Costing Analysis

DUBLIN, November 14, 2013 — (PRNewswire) —

Research and Markets ( http://www.researchandmarkets.com/research/n8wd3c/stmicroelectronics) has announced the addition of the "STMicroelectronics LSM333D 4x4mm 9-Axis IMU Reverse Costing Analysis" report to their offering.

     (Logo: http://photos.prnewswire.com/prnh/20130307/600769 )

System Plus Consulting is proud to publish the reverse costing report of the new 9-DOF IMU supplied by STMicroelectronics.

The LSM333D is a 4x4mm system-in-package featuring a 3axisgyroscope, a 3-axis accelerometer and a 3-axismagnetometer.

ST achieves to obtain this package footprint by combining the 3-axis gyroscope and the 3-axis accelerometer function on the same die. This new structure, combined with an Au-Au hermetic bonding process allow ST's to shrink the 6-axis function by more than 35%.

The LSM333D is targeted for portable applications: indoor navigation, smart user interface, advanced gesture recognition, gaming and virtual reality input device It provides accurate output across full-scale ranges up to ±2000dps (rotational acceleration), ±16g (linear acceleration) and ±12 Gauss (magnetic field).

This report provides complete teardown of the 9-Axis IMU with:

- Detailed photos
- Material analysis
- Schematic assembly description
- Manufacturing Process Flow
- In-depth economical analysis
- Manufacturing cost breakdown
- Selling price estimation



Key Topics Covered:

Overview / Introduction
- Executive Summary
- Reverse Costing Methodology


Companies Profile

Physical Analysis
- Package X-Ray
- Package Opening
- Package Cross-Section
- ASICs Dimensions
- ASICs Delayering
- ASICs Cross-Section
- MEMS Gyro/Accelero Dimensions
- MEMS Gyro/Accelero Cap Opening
- MEMS Gyro/Accelero Sensing Areas
- MEMS Gyro/Accelero Cross-sections
- X/Y-Axis Magnetometer Dimensions
- X/Y-Axis Magnetometer Delayering
- X/Y-Axis Magnetometer Cross-section
- Z-Axis Magnetometer Dimensions
- Z-Axis Magnetometer Delayering
- Z-Axis Magnetometer Cross-section


Manufacturing Process Flow
- Front-End Manufacturing Process Flows
- Description of the Wafers Fabrication Units
- Back-End Packaging Process Flow
- Back-End Packaging Assembly Unit


Cost Analysis
- Yields Hypotheses
- ASICs Wafer Cost
- ASICs Die Cost
- MEMS Gyro/Accelero Wafer Cost
- MEMS Gyro/Accelero Die Cost
- X/Y-Axis Magnetometer Wafer Cost
- X/Y-Axis Magnetometer Die Cost
- Z-Axis Magnetometer Wafer Cost
- Z-Axis Magnetometer Die Cost
- Back-End: Packaging Cost
- Back-End: Final test & Calibration Cost
- LSM333D Component Cost (FE + BE 0 + BE 1)


Estimated Price Analysis
- Manufacturer Financial Ratios
- LSM333D Estimated Selling Price



For more information visit  http://www.researchandmarkets.com/research/n8wd3c/stmicroelectronics

Research and Markets
Laura Wood, Senior Manager.
Email Contact
U.S. Fax: +1-646-607-1907
Fax (outside U.S.): +353-1-481-1716
Sector: Telecommunications and Networks


SOURCE Research and Markets

Contact:
Research and Markets




Review Article Be the first to review this article
CST: Webinar Feb 16, 2017

ALDEC:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Synopsys: Is 40 the new 20?
More Editorial  
Jobs
Technical Support Engineer for EDA Careers at Freemont, CA
Senior Physical Design Engineer for Ambiq Micro at Austin, TX
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Technical Marketing Manager Valley for EDA Careers at San Jose, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
SoC Design Engineer for Intel at Santa Clara, CA
Upcoming Events
3D Printing Electronics Conference at High Tech Campus 1, 5656 Eindhoven Eindhoven Netherlands - Jan 24, 2017
DesignCon 2017 at Santa Clara Convention Center Santa Clara CA - Jan 31 - 2, 2017
Embedded Neural Network Summit at San Jose CA - Feb 1, 2017
International Solid-State Circuits Conference (ISSCC) at San Francisco CA - Feb 5 - 9, 2017
CST: Webinars Begin on February 9



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy