Exar Introduces Industry's Lowest Power Fault Tolerant Transceivers with Level 4 IEC ESD Protection

XR3070-78X Devices Operate from 3.3V with +/-18V Fault Tolerance

FREMONT, Calif., Nov. 12, 2013 — (PRNewswire) —  Exar Corporation (NYSE: EXAR), a leading supplier of high performance analog mixed-signal components and data management solutions, today announced the XR3070-78X family of ruggedized RS-485/RS-422 transceivers for harsh industrial environments.  The analog bus pins can withstand direct shorts up to +/-18V and are protected from ESD events exceeding IEC Level 4. Operating from 3.3V with an industry-leading 300uA idle current, these devices consume half the power of a comparable +/-18V fault tolerant solution.  The family of nine devices supports data rates up to 20Mbps in either full or half duplex configurations, and is intended for use in energy metering, building automation, security systems, process control, and other industrial automation applications.

"ESD and over-voltage events are leading causes of field failures and equipment returns in industrial communication applications," said Jack Roan, product marketing manager, Exar. "The XR3070-78X family delivers robust protection in both these areas, providing our customers with an additional measure of safety against installation errors or cable faultsand at the same time significantly reducing system power consumption."

Common practice in these applications is to route 15Vdc or 12Vac power in the same cable pack as the RS-485 data lines.  Damaged cables or incorrect wiring can expose the transceiver to these voltages, which will permanently damage standard RS-485 devices. The XR3070-78X provides cost effective insurance against wiring faults up to +/-18V, and simultaneously protects against ESD events exceeding IEC Level 4. The IEC standard is significantly more stringent than the Human Body Model (HBM) ESD test commonly referenced by semiconductor device manufacturers, mainly due to the higher currents requirements.

Product Details

XR3070-78X are 1-driver/1-receiver RS-485/422 devices operating from a 3.0V to 3.6V power supply (3.3V +/-10%) and are fully compliant to the TIA/EIA-485 and TIA/EIA-422 standards.  The bus pins feature enhanced ESD protection to +/-15kV (+/-15kV IEC 61000-4-2 Air Gap Discharge, +/-8kV IEC 61000-4-2 Contact Discharge, +/-15kV Human Body Model); non-bus pins are protected up to       +/-4kV Human Body Model.

Product Availability and Pricing

The XR3070-78X family is available in industry standard 8 NSOIC and 14 NSOIC packages.  To request samples please visit Exar's website at www.exar.com, or contact Customer Service at Email Contact. The suggested retail price for the XR3070-78X family is $1.25 in 1,000-unit quantities.

Additional Information

Additional Information on the XR3070-78X family is also available online.

Additional information on Exar's Serial Transceiver products is also available online.

About Exar

Exar Corporation designs, develops and markets high performance, analog mixed-signal integrated circuits and advanced sub-system solutions for the Networking & Storage, Industrial & Embedded Systems, and Communications Infrastructure markets.  Exar's product portfolio includes power management and connectivity components, communications products, and network security and storage optimization solutions. Exar has locations worldwide providing real-time customer support.  For more information about Exar, visit http://www.exar.com.

SOURCE Exar Corporation

Contact:
Exar Corporation
Exar Media Relations, 510-668-7000, Email: Email Contact Agency: Bob Jones or Derek Rye, Publitek, North America: 408-786-5151, Europe: +44 1225 470000, Email: Email Contact
Web: http://www.exar.com




Review Article Be the first to review this article
CST: Webinar September 14, 2017

Synopsys: Custom Compiler

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Real Intent: Leveraging on Investments
More Editorial  
Jobs
Field Application Engineer for Teradyne Inc at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Analog Hardware Engineer for Teradyne Inc at San Jose, CA
FPGA Engineer for Teradyne Inc at San Jose, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
CODES+ISSS 2017, Oct 15-20, 2017, Lotte Hotel, Seoul, South Korea at Lotte Hotel Seoul Korea (North) - Oct 15 - 20, 2017
DVCon 2017 Europe, Oct 16 - 17, 2017, Munich, Germany at Holiday Inn Munich City Centre Munich Germany - Oct 16 - 17, 2017
11th International Symposium on Networks-on-Chip (NOCS 2017) at Seoul Korea (South) - Oct 19 - 20, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise