- Strengthens Microsemi's position in high-value communications timing marketsALISO VIEJO, Calif. and SAN JOSE, Calif., Oct. 21, 2013 — (PRNewswire) — Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, and Symmetricom, Inc. (Nasdaq: SYMM), a worldwide leader in precision time and frequency technologies, announced today that they have entered into a definitive agreement to acquire Symmetricom, Inc. for $7.18 per share through a cash tender offer, representing a premium of 49 percent based on the average closing price of Symmetricom's shares of common stock during the 90 trading days ended Oct. 18, 2013. The board of directors of Symmetricom unanimously recommends that Symmetricom's stockholders tender their shares in the tender offer. The total transaction value is approximately $230 million, net of Symmetricom's projected cash balance at closing.
Headquartered in San Jose, Calif., Symmetricom is the world's leading source of highly precise timekeeping technologies and solutions that enable next generation data, voice, mobile and video networks and services. It provides timekeeping in GPS satellites, national time references, and national power grids as well as in critical military and civilian networks.
"The acquisition of Symmetricom will create the largest and most complete timing portfolio in the industry today," stated James J. Peterson, Microsemi president and chief executive officer. "From source to synchronization to distribution, Microsemi will offer an end to end timing solution for an expanded range of markets, driving increased dollar content opportunity and revenue growth."
"The acquisition of Symmetricom by Microsemi will create a powerful combination," said Elizabeth Fetter, Symmetricom's chief executive officer. "I believe Microsemi is the ideal company to leverage Symmetricom's technology and capabilities further into the communications market along with the scale to accelerate the adoption of the company's innovative new chip scale atomic clock (CSAC) technology into broader markets."
Microsemi expects significant synergies from this immediately accretive transaction. Based on current assumptions, Microsemi expects the acquisition to be $0.22 to $0.25 accretive in its first full calendar year ending December 2014.
Microsemi reaffirms its fiscal fourth quarter guidance included in its fiscal third quarter earnings release issued on July 25, 2013. Microsemi currently intends to announce its fiscal fourth quarter results on Nov. 7, 2013. Further details will be forthcoming.
Tender Offer and Closing
Under the terms of the definitive acquisition agreement, Microsemi will commence a cash tender offer to acquire Symmetricom's outstanding shares of common stock at $7.18 per share, net to each holder in cash. Upon satisfaction of the conditions to the tender offer and after such time as all shares tendered in the tender offer are accepted for payment, the agreement provides for the parties to effect, as promptly as practicable, a merger which would result in all shares not tendered in the tender offer being converted into the right to receive $7.18 per share in cash. The tender offer is subject to customary conditions, including the tender of at least a majority of the fully-diluted shares of Symmetricom's common stock and certain regulatory approvals, including the expiration or termination of the applicable waiting period under the Hart-Scott-Rodino Antitrust Improvements Act, and is expected to close in Microsemi's fiscal first quarter, ending Dec. 29, 2013. No approval of the stockholders of Microsemi is required in connection with the proposed transaction. Terms of the agreement were unanimously approved by the boards of directors of both Microsemi and Symmetricom.
Under the terms of the merger agreement, Symmetricom may solicit superior proposals from third parties for a "go shop" period that extends through Nov. 8, 2013. It is not anticipated that any developments will be disclosed with regard to this process unless and until Symmetricom's board of directors makes a decision to pursue a potential superior proposal. Jefferies LLC, which is acting as Symmetricom's financial adviser, will assist Symmetricom with Symmetricom's go-shop process. There are no guarantees that this process will result in a superior proposal. The merger agreement provides Microsemi with a customary right to match a superior proposal. The agreement also provides for certain termination fees payable to Microsemi in connection with the termination of the agreement in certain circumstances.
Jefferies LLC is acting as financial adviser and Latham & Watkins LLP is acting as legal adviser to Symmetricom. Morgan Stanley provided a fairness opinion to Microsemi and O'Melveny & Myers LLP is acting as legal adviser to Microsemi.
Microsemi will host a conference call, solely to discuss details of the transaction. A live webcast relating to the transaction will be available in the "Investors" section of Microsemi's website at www.microsemi.com in advance of the conference call.
Conference call date: Oct. 21, 2013
Time: 1:45 p.m. PDT (4:45 p.m. EDT)
Dial-in numbers: U.S. 877-264-1110; international 706-634-1357
A webcast of the conference call will also be available in the "Investors" section of Microsemi's website at www.microsemi.com.
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally. Learn more at www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
About Symmetricom, Inc.
Symmetricom (SYMM), a world leader in precise time solutions, sets the world's standard for time. The company generates, distributes and applies precise time for the communications, aerospace/defense, IT infrastructure and metrology industries. Symmetricom's customers, from communications service providers and network equipment manufacturers to governments and their suppliers worldwide, are able to build more reliable networks and systems by using the company's advanced timing technologies, atomic clocks, services and solutions. All products support today's precise timing standards, including GPS-based timing, IEEE 1588 (PTP), Network Time Protocol (NTP), Synchronous Ethernet and DOCSIS® timing. Symmetricom is based in San Jose, California, with offices worldwide. For more information, visit: http://www.symmetricom.com or join the dialogue at http://www.twitter.com/symmetricom.
Microsemi Safe Harbor Statement
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: This release contains forward-looking statements based on current expectations or beliefs, as well as a number of assumptions about future events, and these statements are subject to factors and uncertainties that could cause actual results to differ materially from those described in the forward-looking statements. The reader is cautioned not to put undue reliance on these forward-looking statements, which are not a guarantee of future performance and are subject to a number of uncertainties and other factors, many of which are outside the control of Microsemi and Symmetricom. The forward-looking statements in this release address a variety of subjects including, for example, the expected date of closing of the acquisition, the potential benefits of the merger, including the potentially accretive and synergistic benefits, Microsemi's revenue and earnings guidance, and any other statements of belief or about the Microsemi's plans, beliefs or expectations. The following factors, among others, could cause actual results to differ materially from those described in these forward-looking statements: the risk that Symmetricom's business will not be successfully integrated with Microsemi's business or complement its products, including product mix and acceptance, gross margins and operational and other cost synergies; costs associated with the merger, tender offer and financing; the unsuccessful completion of the tender offer; matters arising in connection with the parties' efforts to comply with and satisfy applicable regulatory approvals and closing conditions relating to the transaction; increased competition and technological changes in the industries in which Microsemi and Symmetricom compete; Microsemi's reliance on government contracts for a portion of its sales, including impacts of the recent federal government shutdown; Microsemi's failure to continue to move up the value chain in its customer offerings; continued negative or worsening worldwide economic conditions or market instability; downturns in the highly cyclical semiconductor industry; intense competition in the semiconductor industry and resultant downward price pressure; inability to develop new technologies and products to satisfy changes in customer demand or the development by the company's competitors of products that decrease the demand for Microsemi's products; unfavorable or declining conditions in end markets; inability of Microsemi's compound semiconductor products to compete successfully with silicon-based products; production delays related to new compound semiconductors; variability of the company's manufacturing yields; the concentration of the factories that service the semiconductor industry; delays in beginning production, implementing production techniques, resolving problems associated with technical equipment malfunctions, or issues related to government or customer qualification of facilities; potential effects of system outages; the effect of events such as natural disasters and related disruptions on our operations; inability by Microsemi to fulfill customer demand and resulting loss of customers; variations in customer order preferences; difficulties foreseeing future demand; rises in inventory levels and inventory obsolescence; potential non-realization of expected orders or non-realization of backlog; failure to make sales indicated by the company's book-to-bill ratio; risks related to the company's international operations and sales, including availability of transportation services, political instability and currency fluctuations; increases in the costs of credit and the availability of credit or additional capital only under more restrictive conditions or not at all; unanticipated changes in Microsemi's tax provisions, results of tax examinations or exposure to additional income tax liabilities; changes in generally accepted accounting principles; principal, liquidity and counterparty risks related to Microsemi's holdings in securities; environmental or other regulatory matters or litigation, or any matters involving contingent liabilities or other claims; the uncertainty of litigation, the costs and expenses of litigation, the potential material adverse effect litigation could have on Microsemi's business and results of operations if an adverse determination in litigation is made, and the time and attention required of management to attend to litigation; uncertainty as to the future profitability of acquired businesses, and delays in the realization of, or the failure to realize, any accretion from acquisition transactions; any circumstances that adversely impact the end markets of acquired businesses; and difficulties in closing or disposing of operations or assets or transferring work, assets or inventory from one plant to another. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances. Guidance is provided only on a non-GAAP basis due to the inherent difficulty of forecasting the timing or amount of certain items that have been excluded from the forward-looking non-GAAP measures, and a reconciliation to the comparable GAAP guidance has not been provided because certain factors that are materially significant to Microsemi's ability to estimate the excluded items are not accessible or estimable on a forward-looking basis.