EDA Consortium Reports Revenue Increase for Q2 2013

SAN JOSE, Calif. — (BUSINESS WIRE) — October 16, 2013 — The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 3.8 percent for Q2 2013 to $1653.4 million, compared to $1593.0 million in Q2 2012. Sequential EDA revenue for Q2 2013 decreased 0.9 percent compared to Q1 2013, while the four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 5.3 percent. The total revenue for the most recent 4 quarters (Q3 2012 through Q2 2013) was $6720.9 Million.

“EDA industry revenue continued to grow in Q2 2013,” said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. “IC Physical Design and Verification was especially strong in Q2, with PCB & MCM, SIP, and services also increasing. Geographically, the Asia Pacific region again reported double digit growth, with the Americas and Europe/Middle East/Africa regions also positive.”

Companies that were tracked employed 29,304 professionals in Q2 2013, an increase of 3.9 percent compared to the 28,205 people employed in Q2 2012, but down 0.2 percent compared to Q1 2013.

The complete MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available via subscription from the EDA Consortium.

Revenue by Product Category

The largest category, Computer Aided Engineering (CAE), generated revenue of $611.1 million in Q2 2013, which represents a 1.2 percent decrease compared to Q2 2012. The four-quarters moving average for CAE increased 5.6 percent.

IC Physical Design & Verification revenue increased to $376.0 million in Q2 2013, a 14.7 percent increase compared to Q2 2012. The four-quarters moving average decreased 0.4 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $148.3 million represents an increase of 5.2 percent compared to Q2 2012. The four-quarters moving average for PCB & MCM increased 10.0 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $432.0 million in Q2 2013, a 2.7 percent increase compared to Q2 2012. The four-quarters moving average increased 8.4 percent.

Services revenue was $86.1 million in Q2 2013, an increase of 1.2 percent compared to Q2 2012. The four-quarters moving average increased 4.9 percent.

Revenue by Region

The Americas, EDA’s largest region, purchased $714.4 million of EDA products and services in Q2 2013, an increase of 1.0 percent compared to Q2 2012. The four-quarters moving average for the Americas increased 3.5 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) was up 7.4 percent in Q2 2013 compared to Q2 2012 on revenues of $280.5 million. The EMEA four-quarters moving average increased 6.1 percent.

Second quarter 2013 revenue from Japan decreased 12.3 percent to $226.7 million compared to Q2 2012. The four-quarters moving average for Japan decreased 3.4 percent.

The Asia/Pacific (APAC) region revenue increased to $431.9 million in Q2 2013, an increase of 18.0 percent compared to the second quarter of 2012. The four-quarters moving average increased 14.4 percent.

About the MSS Report

The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available to EDAC members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the EDA Consortium

The EDA Consortium is the international association of companies that provide design tools and services that enable engineers to create the world’s electronic products used for communications, computer, space technology, medical, automotive, industrial equipment, and consumer electronics markets among others. For more information about the EDA Consortium, visit www.edac.org, or to subscribe to the Market Statistics Service, call 408-287-3322 or email mss13@edac.org.

The information supplied by the EDA Consortium is believed to be accurate and reliable, but the EDA Consortium assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.


EDA Consortium
Paul Cohen, 978-769-2106
Mentor Graphics
Suzanne Graham, 503-685-7789

Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Featured Video
Design Verification Engineer for intersil at Morrisville, North Carolina
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Applications Engineer for intersil at Palm Bay, Florida
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
NVIDIA’s GPU Technology Conference (GTC) at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - Mar 26 - 29, 2018
ESC Conference Boston at boston MA - Apr 18 - 19, 2018
IEEE Women in Engineering International Leadership Conference at 150 W San Carlos St San Jose CA - May 21 - 22, 2018
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: IoTPLL

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise