Operational from 2.7 to 5.5 volts with logic-level inputs and open-drain outputs
BEVERLY, Mass. — (BUSINESS WIRE) — September 26, 2013 — IXYS Integrated Circuits Division (ICD), Inc., a wholly owned subsidiary of IXYS Corporation (NASDAQ: IXYS), announced the immediate availability of a new device for its family of high speed communication ICs, the CPC5001 Dual, One-Channel Each Direction Digital Optical Isolator.
The CPC5001 is a non-inverting logic-signal isolator with buffered-logic inputs and open-drain outputs. Channel 1 propagates a signal from Side A to Side B, while Channel 2 sends a signal from Side B to Side A. The CPC5001 supports 5M baud data rates for digital communications over an optical barrier while providing 3750 Vrms of galvanic isolation.
Available in an 8-pin DIP or 8-pin surface mount package, it functionally replaces two logic buffers and two single-channel optical isolators. Internal band gap references regulate the input LED drive currents to 3 mA to reduce peak power requirements.
While competitive devices work with a minimum supply of 3.0V, the CPC5001 offers a higher degree of design flexibility with guaranteed operation as low as 2.7V. The wide operational power supply range specification of 2.7V to 5.5V enables logic-level translation applications. This device is compatible with the IXYS-Zilog line of MCUs for ‘isolated’ digital control in a wide range of applications in power management, process control, LED lighting control, battery power management, industrial and motor control.
Unlike magnetically isolated digital isolator ICs, transformers, or capacitive isolators, the CPC5001 optical solution requires no internal clocking (a primary source of EMI/RFI interference in designs) and supports direct coupled logic-level isolation without refresh clocks. Input noise rejection (hysteresis) makes the CPC5001 ideal for the industrial power distribution market. The CPC5001 utilizes slew limited output stages to reduce radiated emissions. In addition, the unique design of the CPC5001 optical isolator offers excellent reliability and long operational life.
The CPC5001 Dual High-Speed Digital Optical Isolator is ideal for clock, data, interrupt and reset signals in isolated line receiver and bus receiver applications. The device may be used in Power-over-Ethernet (POE) applications, providing buffering and isolation of signals between the host controller and the Power Supply Equipment (PSE) controller. Additional applications include SPI bus interface, power supply high side interface and isolated signal monitoring and control. The CPC5001 is certified to UL 1577 and EN/IEC 60950.
For additional information, please contact your local sales representative: http://www.ixysic.com/home/pages.nsf/locate.rep or visit http://www.ixysic.com/home/pdfs.nsf/www/CPC5001.pdf/$file/CPC5001.pdf
About IXYS Integrated Circuits Division and IXYS Corporation
IXYS Integrated Circuits Division (formerly Clare, Inc.), a leader in the design and manufacture of solid state relays and high voltage integrated circuits, is a wholly owned subsidiary of IXYS Corporation. IXYS Corporation develops and markets primarily high performance power semiconductor devices that are used in controlling and converting electrical power efficiently in power systems for the telecommunication and internet infrastructure, motor drives, medical systems and transportation. IXYS also serves its markets with a combination of digital and analog integrated circuits. Additional information about IXYS Integrated Circuits Division and IXYS may be found at www.ixysic.com and www.ixys.com.
Safe Harbor Statement
Any statements contained in this press release that are not statements of historical fact, including the performance, rating, availability, reliability, operation and suitability of products for various applications, may be deemed to be forward-looking statements. There are a number of important factors that could cause the results of IXYS to differ materially from those indicated by these forward-looking statements, including, among others, risks detailed from time to time in the Company's SEC reports, including its Form 10-Q for the fiscal quarter ended June 30, 2013. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements.
Catherine Austin, 978-524-6823