JRC 3D Reconstructor® UAV integration at INTERGEO 2013

25th September, 2013, Brescia, Italy- Gexcel Srl is attending INTERGEO, the prime international event to introduce new 3D software tools and solutions focusing on the most recent release of the worldwide renowned  JRC 3D Reconstructor® software for Unmanned Aerial Vehicle (UAV) and Drone platforms . 

In step with the path of the latest technologies in three dimensional laser scanning and photogrammetry, Gexcel Srl has released the new version of JRC 3D Reconstructor® 2.9.1 with a special and very strong focus on UAV and Drone platforms. UAV and Drones can quickly and cheaply capture georeferenced High Resolution (HR) images. Third parties software typically produces GeoTIFF global images and 3D point clouds of the investigated area.These ingredients can be easily managed in JRC 3D Reconstructor® to merge the GeoTIFF global image color over the point cloud and produce a 3D HR texturized point cloud and 3D HR texturized mesh models. Using JRC 3D Reconstructor® all the volume calculations, cross sections, cut & fill, crests & toes, isolines, etc., can be created with a greater accuracy, thanks to the real color state processing. This new feature again emphasizes the importance that JRC 3D Reconstructor® gives to the color information. It is considered as a most powerful tool for detailed geotechnical and geological investigations ( https://vimeo.com/75386387).

Gexcel Srl has a rich history spanning more than 10 years of proven fully featured lidar and imagery analysis software packages with the JRC 3D Reconstructor®, completely compatible with all terrestrial, mobile and airborne scanners from manufacturers such as Faro, Leica, MDL, Optech, Riegl, Stonex, Topcon, Trimble and Z+F. Gexcel Srl is a spin off company of the University of Brescia, established in 2007 from the academic know-how of the University and the applied research achievements of the European Joint Research Centre (JRC), located in Ispra (Italy). Gexcel Srl is proud to support all major standard formats such as the ASTM E57 and LAS.

Visit us at Intergeo, Hall 3 Booth F 3.033

For more information contact:
Gexcel Srl
Via Branze 45
I-25123 Brescia, Italy
Tel:  +39 030 65 95 001
www.gexcel.it
email:  Email Contact





Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

ClioSoft: Design Hub

Featured Video
Editorial
Peggy AycinenaIP Showcase
by Peggy Aycinena
Grant Pierce: Grand Challenges in IP
More Editorial  
Jobs
LVS for PDK Design Engineer SILICON VALLEY for EDA Careers at San Jose, CA
Technical Support Engineer for EDA Careers at Freemont, CA
LVS PEX DESIGN ENGINEERS SILICON VALLEY for EDA Careers at San Jose, CA
Upcoming Events
Automotive E/E Architecture China Conference at Shanghai China - May 25 - 26, 2017
EMC PCB Design Integration at 13727 460 Ct SE North Bend WA - Jun 6 - 9, 2017
DAC 2017 Conference at Austin TX - Jun 18 - 22, 2017
2017 FLEX Conference at Monterey Conference Center 1 Portola Plaza, Monterey CA - Jun 19 - 22, 2017
ClioSoft
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy