GE Unveils the Ten Global Finalists for its Open Innovation Jet Engine Bracket Design Quest

  • GE selects ten finalists from nearly 700 global design entries representing 56 countries to move onto the final phase of its Quest
  • Finalists’ designs leverage additive manufacturing techniques to reduce weight of a jet engine bracket
  • Finalists are based in Australia, France, Hungary, Indonesia, Italy, Poland, Romania, Sweden and the United Kingdom

FAIRFIELD, Conn. — (BUSINESS WIRE) — September 17, 2013 — GE (NYSE: GE) today unveiled ten Phase I finalists from its Jet Engine Bracket Design Quest. This design Quest invited individuals, companies and institutions to redesign loading brackets found on jet engines using 3D printing. A critical component of a jet engine, brackets support the weight of the engine during handling and must withstand significant vibrations during flight.

Additive manufacturing has the potential to reduce the weight of a single aircraft engine by one thousand pounds and drive substantial reduction in fuel consumption. The Quest combines the power of additive manufacturing with open innovation and seeks design solutions which will not only reduce the bracket weight but also improve its strength and performance.

Mark Little, Senior Vice President and Chief Technology Officer, GE Global Research Center said, “We have entered into a new era of manufacturing that is leveraging the proven power of open innovation. Additive manufacturing is allowing GE, together with the Maker community, to push the boundaries of traditional engineering. These finalists have demonstrated what can be achieved by embracing this more open, collaborative model.”

The Quest, which launched in June 2013, drew a record number of design entries via the GrabCAD platform’s community of entrepreneurs, institutions and companies. Each finalist will receive $1,000 and move on to the second phase, in which the jet engine bracket designs will be additively manufactured and subjected to load testing by GE.

"The GE Quest has been one our most successful challenges, in terms of number of entrants, technical sophistication of submissions and quality of results", said Hardi Meybaum, CEO of GrabCAD."It’s been great watching the community exploit the advantages of additive manufacturing in such a demanding application."

Located around the world, finalists include:

  • Ármin Fendrik, based in Hungary, is a third-year university student and this entry is among his first 3D printing designs.
  • Thomas Johansson, Ph.D, based in Sweden, is a consultant for a Swedish hyper-car manufacturer and is a champion snowmobile drag racer.
  • Nic Adams, based in Australia, supported the installation of a pathology lab automation system in a Sydney hospital, which includes a robotic handling system that helps analyze hundreds of test tubes each day.
  • M Arie Kurniawan, based in Indonesia, is co-founder of an engineering firm that provides high quality mechanical engineering, design optimization and product design services.
  • Sebastien Vavassori, based in the United Kingdom, is a stress engineer for a leading European space manufacturer and service provider.
  • Piotr Mikulski, based in Poland, works as a rapid prototyping systems specialist for a Polish-Swiss joint-venture that provides industrial and machining services.
  • Andreas Anedda, based in Italy, is a postgraduate university student and holds three patents.
  • Alexis Costa is based in France.
  • Mandli Peter is based in Hungary.
  • Fidel Chirtes is based in Romania.

The second phase of the Quest will run from September 17 to November 15 and the top eight designs will receive awards from a total prize pool of $20,000.

This Quest and GE’s focus on additive manufacturing are part of the company’s continued commitment to the ongoing industrial revolution – advanced manufacturing. GE is the world’s largest user of additive technologies in metals, with a full-scale additive manufacturing facility in Cincinnati, Ohio, and a global team of 600 engineers across 21 sites.

More information on the Open Innovation Jet Engine Bracket Design Quest can be found at: http://grabcad.com/challenges/ge-jet-engine-bracket-challenge . More information on additive manufacturing can be found at:  http://www.ge.com/stories/additive-manufacturing .

1 | 2  Next Page »



Review Article Be the first to review this article
Featured Video
Jobs
Sr. Staff Design SSD ASIC Engineer for Toshiba America Electronic Components. Inc. at San Jose, CA
Principal Engineer FPGA Design for Intevac at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
SOC Logic Design Engineer for Global Foundaries at Santa Clara, CA
Senior DSP Architect / System Engineer for General Dynamics Mission Systems at Scottsdale, AZ
Upcoming Events
FPGA 2017 at 350 Calle Pincipal, Marriott Hotel Monterey CA - Feb 22 - 24, 2017
DVCon 2017 Conference at DoubleTree Hotel San Jose CA - Feb 27 - 2, 2017
IoT Summit 2017 at Great America ballroom, Santa Clara Convention Center Santa Clara CA - Mar 16 - 17, 2017
SNUG Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Mar 22 - 23, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy