Hand-held 3D Printing Pen 3Doodler Unveiled at IFA

BERLIN, September 5, 2013 — (PRNewswire) —

Most affordable 3D printing device shown for first time at European tech show

3Doodler, the world's first 3D printing pen, showcases its final consumer-ready product at IFA this September. The pen, which will retail at just $99, allows people to create amazing 3D objects, limited only by their own imagination.

The 3Doodler first made headlines by raising over $2.3 million on crowd-funding site Kickstarter, making it one of the most successful Kickstarter projects of all time. Since then, the 3Doodler has been hotly anticipated with a waiting list that boasts some of the best-known names in architecture, art and design.

About the pen

Compact and easy to use, the 3Doodler allows you to literally draw in the air - whether freestyle 3D sketching or tracing shapes from templates to make larger architectural structures; the 3Doodler allows designers, geometrists, hobbyists, artists, and architects to test out their ideas quickly and easily.

3Doodler uses both ABS and PLA plastic as the pen's "ink", just like the more expensive 3D printers on the market. ABS is very resilient and one of the most common plastics around, while PLA is a biodegradable "bioplastic" with a lower melting temperature than ABS, and very well suited to Doodling on glass, metal, or in other mixed medium creations.

The compact and simple design has sparked imaginations worldwide; handmade bikes, Brazilian parrots and even small-scale models of the Eiffel Tower and Big Ben are just a few of the works that have been created. Despite the wide array of creative possibilities, 3Doodler is easy to use and requires only a power socket and a strand of plastic to start drawing within minutes.

"We wanted to push the boundaries of design and allow users to be creative without restrictions such as access to sophisticated software programs." said Maxwell Bogue, Co-Founder & CEO of WobbleWorks. "With 3Doodler, you don't need any technical knowledge or an expensive computer, just a creative mind and the desire to have fun! There are serious commercial applications of course, but the 3Doodler is affordable enough to appeal to a wide variety of consumers too. Following more than a year of development, we're very excited to be revealing the final version of the pen at IFA this year".

Initial production is underway to deliver the first 3Doodlers to early backers on schedule this month. Refills for the pen are readily available and, like the pen, have intentionally been kept affordable.

Where to find 3Doodler at IFA 2013:

Showstoppers - 5th September 2013

Pepcom - 6th September 2013

Techwatch - Throughout IFA with the co-founders in attendance 6th-7th September

Editor's notes

High-resolution screenshots, logos and headshots can be found at http://bit.ly/3DoodlerPressPack  http://bit.ly/3DoodlerPressPack

For more information please visit http://www.the3doodler.com

For media enquiries please contact Email Contact.

About WobbleWorks, Inc.

The 3Doodler is the world's first 3D printing pen, having quickly become Kickstarters most popular 3D consumer printing device and the third highest funded technology project on Kickstarter. This month, 3Doodler have announced their 3D printing pens are on schedule and shipping out to the pen's first backers in September.

Designed by WobbleWorks, Inc., an emerging consumer electronics and robotics company with big ideas, the 3Doodler has been created to be compact and easy to use, you simply plug the 3Doodler into a power socket and start drawing anything in 3D within minutes. Whether freestyle 3D sketching, or tracing shapes from templates to make larger architectural structures, anything is possible.  

Note: the plastic extruded from 3Doodler is safe to touch once it has left the pen, but the pen itself has a metal tip that can reach 240C, so the 3Doodler is not a toy for children!

SOURCE Dynamo KickStater PR

Dynamo KickStater PR
Heather Delaney - Mobile: +447446073352

Review Article Be the first to review this article

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Technical Support Engineer for EDA Careers at Freemont, CA
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy