EDA Consortium Reports Revenue Increase for Q1 2013

SAN JOSE, Calif. — (BUSINESS WIRE) — August 6, 2013 — The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 8.1 percent for Q1 2013 to $1668.5 million, compared to $1544.2 million in Q1 2012. Sequential EDA revenue for Q1 2013 decreased 6.2 percent compared to Q4 2012, while the four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 7.0 percent. The total revenue for the most recent 4 quarters (Q2 2012 through Q1 2013) was $6660.5 million.

“The EDA industry continues to grow in Q1 2013,” said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. “Services and IP were especially strong, and PCB was the strongest major product category. Geographically, the Asia Pacific region reported double-digit growth, with the Americas and Europe/Middle East/Africa regions also positive.”

Companies that were tracked employed 29,360 professionals in Q1 2013, an increase of 5.41 percent compared to the 27,848 people employed in Q1 2012, but down 0.7 percent compared to Q4 2012.

The complete MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available via subscription from the EDA Consortium.

Revenue by Product Category

The largest category, Computer Aided Engineering (CAE), generated revenue of $599.1 million in Q1 2013, which represents a 4.7 percent increase over Q1 2012. The four-quarters moving average for CAE increased 9.0 percent.

IC Physical Design & Verification revenue decreased to $340.1 million in Q1 2013, a 3.1 percent decrease compared to Q1 2012. The four-quarters moving average decreased 1.0 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $157.2 million represents an increase of 6.7 percent compared to Q1 2012. The four-quarters moving average for PCB & MCM increased 8.0 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $470.3 million in Q1 2013, a 20.2% percent increase compared to Q1 2013. The four-quarters moving average increased 11.2 percent.

Services revenue was $101.9 million in Q1 2013, an increase of 23.8 percent compared to Q1 2012. The four-quarters moving average increased 3.5 percent.

Revenue by Region

The Americas, EDA’s largest region, purchased $710.6 million of EDA products and services in Q1 2013, an increase of 6.2 percent compared to Q1 2012. The four-quarters moving average for the Americas increased 6.3 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) was up 4.8 percent in Q1 2013 compared to Q1 2012 on revenues of $276.2 million. The EMEA four-quarters moving average increased 5.8 percent.

First quarter 2013 revenue from Japan decreased 0.6 percent to $259.8 million compared to Q1 2012. The four-quarters moving average for Japan increased 0.1 percent.

The Asia/Pacific (APAC) region revenue increased to $422.0 million in Q1 2013, an increase of 20.5 percent compared to the first quarter in 2012. The four-quarters moving average increased 14.1 percent.

About the MSS Report

The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available to EDAC members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the EDA Consortium

The EDA Consortium is the international association of companies that provide design tools and services that enable engineers to create the world’s electronic products used for communications, computer, space technology, medical, automotive, industrial equipment, and consumer electronics markets among others. For more information about the EDA Consortium, visit www.edac.org, or to subscribe to the Market Statistics Service, call 408-287-3322 or email Email Contact.

The information supplied by the EDA Consortium is believed to be accurate and reliable, but the EDA Consortium assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.


EDA Consortium
Paul Cohen, 978-769-2106
Mentor Graphics
Suzanne Graham, 503-685-7789

Review Article Be the first to review this article

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Technical Support Engineer for EDA Careers at Freemont, CA
Staff Software Engineer - (170059) for brocade at San Jose, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy