Realtek Improves IC Reliability by Using Calibre PERC to Perform Advanced Circuit Design Checks

WILSONVILLE, Ore. — (BUSINESS WIRE) — July 2, 2013Mentor Graphics Corporation (NASDAQ: MENT) today announced that Realtek Semiconductor Corp. is now using the Calibre® PERC™ product as its production sign-off tool for performing sophisticated electrical circuit checks (ERC) on its designs. These checks help ensure robust protection against potential critical reliability issues, including electrostatic discharge (ESD). The Calibre PERC product has replaced the previous internal, SPICE-based approach to circuit checking, which was slow and required complex custom code development.

“Robust circuit verification, including checking for effective ESD protection, is extremely important for advanced designs with mixed-signal components,” said Jessy Chen, vice president and spokesman at Realtek. “Using PERC, we get better performance, accuracy and flexibility. PERC helps to focus our debug time on circuit issues that matter most.”

“The electrical design rule checks that our customers need to develop and automate are rapidly growing in complexity, especially in multi-voltage, mixed-signal environments,” said Shu-Wen Chang, director of Calibre Foundry Programs for the Mentor Graphics® Design-to-Silicon division. “We have continued to enhance Calibre PERC to meet these new requirements, providing a flexible and programmable platform for circuit verification. Specifically, Calibre PERC’s topological capabilities have been extended to include circuit-driven resistance and current density checking, giving customers like Realtek faster and more repeatable ways to verify that their design has met their reliability requirements.”

Calibre PERC Enables New Electrical Checks

The Calibre PERC product enables users to define electrical checks using both topology and geometric information, allowing them to verify specific device and interconnect structures and electrical characteristics. For example, it can identify the omission of required ESD protection devices on a schematic or netlist, and it can look for errant signal paths and other soft connection errors. These include well connection errors, floating devices, nets, pins, incorrect voltage supply connections, excessive series pass gates, problem-level shifter designs, antenna checks, floating wells, minimum “hot” NWELL width, and many others.

About Realtek

Realtek Semiconductor Corp. is one of the world’s leading IC providers. Realtek designs and develops a wide range of IC products for communications network, computer peripheral, and multimedia applications. Products include 10/100/1000M Ethernet Controllers/PHYs, 10/100/1000M Ethernet Switch Controllers/Media Converter Controllers/Gateway Controllers, Wireless LAN Controllers & AP/Router SoCs, DSL Chips, VoIP Solutions, AC'97/High Definition Audio Codecs, Clock Generators, Card Reader Controllers, Web Camera Controllers, LCD Monitor/ATV/DTV Controllers, and Digital Home Center Controllers. With advanced design expertise in RF, analog, and mixed signal circuits, and with strong manufacturing and system knowledge, Realtek offers full-featured, high-performance, and competitive total solutions. More information on Realtek can be found on our website: www.realtek.com.

About Mentor Graphics

Mentor Graphics Corporation is a world leader in electronic hardware and software design solutions, providing products, consulting services, and award-winning support for the world’s most successful electronic, semiconductor, and systems companies. Established in 1981, the company reported revenues in the last fiscal year of about $1,090 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com.

(Mentor Graphics and Calibre are registered trademarks, and PERC is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)



Contact:

Mentor Graphics
Carrie Yu, +86-21-6101-6311
Email Contact
or
Mentor Graphics
Sonia Harrison, 503-685-1165
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Technical Support Engineer for EDA Careers at Freemont, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy