Rapid Prototyping for Torlon and PEEK by Drake Plastics

CYPRESS, TX --(Marketwired - May 31, 2013) - Drake Plastics Ltd. Co. is now capable of producing quality prototypes using 3D printing technology. Drake adds prototyping for Torlon and PEEK customers to assist in new part development activities. This capability speeds up the process from idea to part and is a natural extension of Drake's lean approach to business. Steve Quance, Drake's founder, added, "3D Modeling and Additive Manufacturing in general are emerging process technologies which technical leaders like Drake must embrace."

Rapid Prototyping enables Drake to enter the part development process one step earlier, eliminating wasteful iterations of machined prototypes and/or injection mold tooling rework. According to Len Wojtaszczyk, Drake's Injection Molding Manager, "Customers are increasingly asking for our involvement earlier in the design process. 3D printing allows us to show surface finishes and part features only the most experienced designers may catch before a tool is machined."

Drake's 3D printing is proving valuable for complex prototype parts which will eventually be molded or machined from Torlon or PEEK.                                        

Drake's capability supports .stl and .obj files from leading 3D design software programs. Drake models are produced from polylactic acid (PLA). Typical tolerances are 0.010″ (0.25mm) and provide a build size of 11.0″ L x 6.0″ W x 6.0″ H (285mm L x 150mm W x 150mm H).

About Drake Plastics

Founded in 1997, Drake Plastics pioneered the production of stock shapes from glass reinforced Torlon 5030 in support of the Javelin Missile Program. Drake continues to offer an increasing product line of machinable rod, plate and Seamless Tube® from Torlon and specialty PEEK grades. Drake practices lean techniques, producing products in single-piece flow ensuring that the first part is identical to the last. This manufacturing approach is central to Drake's mission of perfection in both product and service.

Today, Drake manufactures and stocks 11 different PEEK based products in addition to the most complete line of Torlon based shapes worldwide. Drake extrudes custom sizes with low minimums, quickly and economically. Injection molded parts, near-net shapes, fabricated standard parts and prototype models are also available.

Learn more at www.drakeplastics.com.

Drake Plastics Ltd. Co., The Torlon Specialists, and Drake Research Ltd., The Specialty PEEK Specialists, use the Seamless Tube® Trademark under license from Drake Plastic Products Inc.

Image Available: http://www.marketwire.com/library/MwGo/2013/5/28/11G005368/Images/Prototyping_for_Torlon_and_PEEK-dd667a19-37ca-4dfd-aeb3-49a295e377d7.jpg

Press Contact:
Tiffany Patterson
(281) 255-6855


For More Information:
Steven Quance
(281) 255-6855

Email Contact


Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy