Mentor Graphics Design and Verification Tools Certified for TSMC 16nm FinFET

WILSONVILLE, Ore. — (BUSINESS WIRE) — May 28, 2013Mentor Graphics Corp. (NASDAQ: MENT) today announced that its Calibre® physical verification platform has achieved version 0.1 of design reference manual (DRM) and SPICE model tool certification for TSMC’s 16nm manufacturing process, which incorporates 3D (FinFET) transistors for higher performance. TSMC has given 0.1 Certification to the Mentor® Olympus-SoC™ place and route system, and the Calibre physical verification platform. The Mentor 16nm platforms are now available to support customers with their early 16nm FinFET design efforts.

The Mentor Olympus-SoC place and route system for 16nm FinFET enables efficient double patterning (DP) and timing closure with comprehensive support for new design rule checks and multi-patterning rules, fin grid alignment for standard cells and macros during placement, and Vt min-area rule and implant layer support during placement.

The Calibre nmPlatform product for 16nm FinFET supports advanced design rule definition and litho hotspot pre-filtering. In addition, the Calibre SmartFill facility was enhanced to support the TSMC-specified filling requirements for FinFET transistors, including support for density constraints and multilayer structures needed for FinFET layers. The SmartFill solution also provides double patterning support for back end layers and user-defined fill cells that are automatically inserted into a layout based on analysis of the design.

Reliability is also a key element of TSMC’s 16nm FinFET process technology. FinFET 3D transistors will enable devices with higher drive strengths than at previous nodes, so accurate reliability verification becomes even more critical. As highlighted in the Design Enablement section of the recent TSMC Technology Symposium, reliability checks based upon the Calibre PERC™ platform will enable customers to analyze and correct issues like electrostatic discharge (ESD) and latch-up.

“With the advent of FinFET transistors, such as those used in TSMC’s 16nm FinFET process, the fundamental geometric architecture of IC transistors has been redefined for the first time since Federico Faggin designed the commercial silicon-gate IC at Fairchild in 1968,” said Joseph Sawicki, vice president and general manager of the Design to Silicon division at Mentor Graphics. “We’ve worked closely with TSMC to understand the impact of FinFETs and their interaction with other innovations, such as multi-patterning, on the physical design flow. Enhancing our products to handle 16nm FinFET requirements transparently helps designers stay focused on using the new process capabilities to create more value for their customers.”

“Mentor is a longstanding contributor to the TSMC OIP ecosystem and our on-going collaboration has resulted in the general market availability of 16nm FinFET design kits to support our earliest advanced technology customers,” said Suk Lee, TSMC senior director, Design Infrastructure Marketing Division. “This successful milestone once again confirms that foundry-EDA collaboration is critical to driving innovation for the semiconductor design industry.”

About Mentor Graphics

Mentor Graphics Corporation is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in the last fiscal year of about $1,090 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com.

(Mentor Graphics, Mentor, and Calibre are registered trademarks and Olympus-SoC and PERC are trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)



Contact:

Mentor Graphics
Gene Forte, 503-685-1193
Email Contact
or
Sonia Harrison, 503-685-1165
Email Contact




Review Article Be the first to review this article

Aldec Simulator Evaluate Now

Featured Video
Jobs
DSP Tools Engineer for Cirrus Logic, Inc. at Austin, TX
Design Verification Engineer for intersil at Morrisville, NC
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
Acoustic Systems Test Engineer for Cirrus Logic, Inc. at Austin, TX
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
Upcoming Events
IC Open Innovation Panel During REUSE 2017 at Santa Clara Convention Center 5001 Great America Parkway Santa Clara CA - Dec 14, 2017
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise