IAR Systems provides development tools for Microsemi’s SmartFusion2 SoC FPGAs

STOCKHOLM — (BUSINESS WIRE) — March 18, 2013 — Today, IAR Systems® announces support for the newly released SmartFusion®2 product family from Microsemi Corporation. Customers working with these logic devices now gain access to the powerful code optimizations and comprehensive debugging and trace capabilities offered by the C/C++ development tool suite IAR Embedded Workbench® for ARM®.

Microsemi’s SmartFusion2� http://www.microsemi.com/soc/products/smartfusion2/) system-on-chip (SoC) field-programmable gate arrays (FPGAs) are designed to address the reliability requirements of high availability, safety-critical and mission-critical systems in industrial, aviation, defense and communications applications. SmartFusion2 integrates inherently reliable flash-based FPGA fabric, a 166 megahertz (MHz) ARM Cortex™-M3 processor, advanced security processing accelerators, DSP blocks, SRAM, eNVM and industry-required high-performance communication interfaces all on a single chip.

“We are excited that our customers can benefit from using the high-performance compiler and debugger tools provided by IAR Systems,” says Jim Davis, vice president of software & systems engineering at Microsemi. “In addition to advanced security capabilities, our SmartFusion2 Soc FPGA devices also feature low power consumption without sacrificing performance. Microsemi’s Libero® SoC software toolset for SmartFusion2 fully integrates IAR Embedded Workbench for application development, providing a powerful and user-friendly full set of tools.”

“We have been fortunate to work with Microsemi for many years, and support for SmartFusion2 strengthens our position in the FPGA domain,” says Mats Ullström, Director of Products and Services, IAR Systems. “By using IAR Systems’ tools for compiling and debugging, developers working with SmartFusion2 will be able to fully leverage Microsemi’s advanced technology.”

IAR Embedded Workbench integrates the highly optimizing IAR C/C++ Compiler™, as well as the feature-rich C-SPY® Debugger. IAR Systems’ integrated in-circuit debugging probe JTAGjet™-Trace� http://www.iar.com/Products/Hardware-Debug-probes/JTAGjet-Trace-for-ARM/) enables complete insight into the application’s behavior through Embedded Trace Macrocell (ETM). Users can observe the effect of the program as it executes on the board and use features like full instruction trace and function profiling to identify problems in the application. More information and free evaluation licenses are available at www.iar.com/ewarm.

### Ends

Editor's Note: IAR Systems, IAR Embedded Workbench, C-SPY, visualSTATE, The Code to Success, IAR KickStart Kit, I-jet, IAR and the logotype of IAR Systems are trademarks or registered trademarks owned by IAR Systems AB. All other products are trademarks of their respective owners.

About IAR Systems

IAR Systems is the world’s leading supplier of software tools for developing embedded systems applications. The software enables over 14,000 large and small companies to develop premium products based on 8-, 16-, and 32-bit microcontrollers, mainly in the areas of industrial automation, medical devices, consumer electronics, telecommunication and automotive products. IAR Systems has an extensive network of partners and cooperates with the world’s leading semiconductor vendors. IAR Systems Group AB is listed on NASDAQ OMX Stockholm. For more information, please visit www.iar.com

This information was brought to you by Cision http://news.cision.com



Contact:

IAR Systems Contact
Fredrik Medin, Marketing Director
Tel: 46 18 16 78 00
E-mail: Email Contact




Review Article Be the first to review this article
Aldec

Featured Video
Jobs
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Upcoming Events
IPC Technical Education - PCB Layout - Place and Route at Del Mar Fairgrounds 2260 Jimmy Durante Blvd. Del Mar CA - May 2, 2018
IPC Technical Education at Wisconsin Center 400 W Wisconsin Ave. Milwaukee WI - May 8, 2018
IPC High Reliability Forum at Embassy Suites: Baltimore-At BWI Airport 1300 Concourse Drive Linthicum MD - May 15 - 17, 2018
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise