IPC Comments on Proposed Revisions to USML Category XI on Military Electronics

Urges State Department to Clarify Enumeration of Printed Boards

BANNOCKBURN, Ill., USA -- January 29, 2013 -- In regulatory comments filed yesterday, IPC commended  the U.S. State Department for enumerating printed boards in proposed revisions to Category XI (military electronics) of the U.S. Munitions List (USML). IPC also urged the State department to modify the proposed language to more clearly express the controls on PCBs for ITAR-controlled defense electronics.

IPC has, for the past year, conducted an educational campaign, Follow the Law, Protect the Board, to highlight the importance to national security of clear, unambiguous controls for PCBs because of the important information they contain about the workings of defense electronics for which they are uniquely designed.

“IPC agrees with the State Department that strong and clear export controls on printed boards for defense electronics are necessary,” said IPC President and CEO John Mitchell. “IPC is grateful for the opportunity, afforded by this regulatory process, to affirm our support for the enumeration of printed boards and to offer the industry’s recommendations on further clarifying the treatment of printed boards on the USML.”

The State Department’s draft rule for Category XI controls printed boards for “which the layout is ‘specially designed’ for defense articles.” While IPC supports the level and scope of controls that the draft rule would establish for printed boards, it believes that the intent could be more clearly articulated to address longstanding confusion about ITAR’s treatment of printed boards. This confusion has inadvertently resulted in the unlicensed sourcing of printed boards for ITAR items from non-ITAR facilities.

“We are most concerned that the use of specially designed could perpetuate the erroneous belief that there are non-specially designed printed boards, leading companies to disregard ITAR controls on PCBs,” says Fern Abrams, IPC director of government relations and environmental policy. 

IPC has offered alternative language that more clearly captures the State Department’s end goal: to control under ITAR printed boards designed for ITAR-covered defense electronics. IPC has also urged the State Department to make clear in its final rule that all printed boards are, by their very nature, specially designed and that designs and digital instructions for printed boards constitute technical data under paragraph (d) of the proposed rule.

IPC’s comments and more information about its advocacy efforts in the area of export controls are available at www.ipc.org/export-controls.

IPC will host a free BUZZ session “Export Controls: Understanding ITAR and its Reform,” at IPC APEX EXPO 2013 on February 20. In addition, IPC’s Government Relations Committee will host an open forum on Tuesday, February 19 to discuss, and get input on, its on-going efforts to support the prosperity of the global electronics manufacturing industry. To register, visit  www.IPCAPEXEXPO.org/register

About IPC

IPC ( www.IPC.org) is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3,300 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2.02 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; Bangkok, Thailand; and Shanghai, Shenzhen, Chengdu and Beijing, China.


Contact:

Anna Garrido
Director
Marketing and Communications
IPC
Tel.: +1 847-597-2804
Email Contact




Review Article Be the first to review this article

Synopsys: Custom Compiler

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Real Intent: Leveraging on Investments
More Editorial  
Jobs
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Analog Hardware Engineer for Teradyne Inc at San Jose, CA
FPGA Engineer for Teradyne Inc at San Jose, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Field Application Engineer for Teradyne Inc at San Jose, CA
Upcoming Events
IEEE Electronic Design Processing Symposium 2017 at 673 S. Milpita Blvd Milpitas CA - Sep 21 - 22, 2017
CODES+ISSS 2017, Oct 15-20, 2017, Lotte Hotel, Seoul, South Korea at Lotte Hotel Seoul Korea (North) - Oct 15 - 20, 2017
DVCon 2017 Europe, Oct 16 - 17, 2017, Munich, Germany at Holiday Inn Munich City Centre Munich Germany - Oct 16 - 17, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise