ESPRIT by DP Technology at Manufacturing & Automation Expo 2012 Stockholm, Sweden, Oct. 23-26

Camarillo, Calif.  — Oct. 12, 2012 — ESPRIT® 2013, the latest version of the innovative computer-aided manufacturing (CAM) software developed by DP Technology Corp., will be exhibited Oct. 23-26 at Manufacturing & Automation Expo 2012, scheduled to take in Stockholm, Sweden.

The biennial Manufacturing & Automation Expo, or MAEXPO, is a major manufacturing-industry event that addresses essentials such as product development, machine tools, automation, assembly, and quality testing and measurement.

ESPRIT will be exhibited at stand A09:01, where visitors will receive one-on-one demonstrations and presentations of features available within the latest generation of the software. ESPRIT 2013 offers upgrades in all machining disciplines, including enhancements to turning, milling, mill-turn and wire EDM cycles.

New to ESPRIT 2013, the patent-pending ProfitMilling strategy for 2-, 3-, 4- and 5-axis roughing cycles allows customers to remove more material in a shorter amount of time. ProfitMilling is a high-speed roughing cycle that allows you to take a significantly deeper cut of the tool and increase the cutting feed. Rather than controlling just one parameter, ProfitMilling monitors several vital cutting and machine characteristics.

The ProfitMilling toolpath manages chip load and side-cutter force in the calculation of toolpath while keeping the engagement angle and material removal rate within a specific range.

It also incorporates dynamic feedrate changes throughout the toolpath and takes advantage of toolpath optimization for specific machine capabilities.

“Our tests have shown that ProfitMilling typically reduces cycle time by 75 percent, minimizes programming time, reduces energy consumption, and increases tool life by an average of 500 percent,” said ESPRIT Product Manager Kenyon Whetsell. “We’ve seen the most dramatic benefits in using the ProfitMilling strategies with light to medium-duty machine tools.” 

 

About ESPRIT

ESPRIT is a high-performance computer-aided manufacturing (CAM) system for a full range of machine tool applications. ESPRIT delivers powerful full-spectrum programming for 2–5 axis milling, 2–22 axis turning, 2–5 axis wire EDM, multitasking mill-turn machining and B-axis machine tools, and high-speed 3- and 5-axis machining.

 

About DP Technology Corp.

            DP Technology maintains its worldwide headquarters in Camarillo, Calif., and product development teams in California; Berlin, Germany, and Florence, Italy. Sales and support operations are located in Europe, Asia, and North and South America. For additional information about DP Technology and ESPRIT, call +1-805-388-6000, send an e-mail to esprit@dptechnology.com, or visit the company Web site at www.dptechnology.com.

 

MEDIA CONTACT:                        

Stacey Wiebe

Public Relations Coordinator

DP Technology

(805) 388-6000

Email Contact

 

TECHNICAL CONTACT:

Chuck Mathews

Vice President

DP Technology

(805) 388-6000

Email Contact




Review Article Be the first to review this article
CST: Webinar November 9, 2017

Synopsys: Custom Compiler

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise