Esterel Technologies Introduces SCADE LifeCycle Qualified Test Environment and Interface with the LDRA Tool Suite®

Esterel Technologies and LDRA Interface Provides Complete Design, Verification and Testing Strategy for Safety-Critical Applications

ELANCOURT, France & BOSTON — (BUSINESS WIRE) — July 24, 2012 — Esterel Technologies, the leading worldwide provider of model-based development solutions for critical systems and software, today announced the SCADE LifeCycle® Qualified Test Environment (QTE) and its interface with the LDRA tool suite.

SCADE LifeCycle QTE

SCADE LifeCycle QTE is a module that allows developers of certifiable applications using SCADE Suite® to automate running test cases created during model-based verification activities on host and on target, thus allowing a complete verification workflow from high-level requirements-based testing on model down to integration testing on target. With SCADE LifeCycle QTE, conformity report generation and model coverage measure are automated, enabling significant time and cost savings over manual testing.

Developers of certifiable applications using SCADE Suite for model-based application development and SCADE LifeCycle QTE for verification activities, have an integrated flow providing for full benefit of both a model-based approach and cost-effective testing environment.

“SCADE LifeCycle QTE allows users to efficiently achieve the objectives related to model-based verification on host and software testing on target, as defined in the Model-Based Development and Verification Supplement to DO-178C”, states Bernard Dion, CTO of Esterel Technologies and member of the SC-205/WG-71 committee that defined the new standard.

Integration with LDRA

SCADE Lifecycle QTE for LDRA integrates model-based application development with SCADE Suite and the LDRA tool suite. On-target testing is required to achieve the most rigorous levels of DO-178C compliance. Thanks to LDRA’s 40 years of helping clients achieve certification, the LDRA tool suite has been fine-tuned to provide automated, on-target testing to validate that software execution behaves as expected.

Model-based applications developed with SCADE Suite can now be automatically passed to TBrun®, the unit testing component in the LDRA tool suite, which ensures that the embedded application is running as expected on the target. The same tests can automatically be reused on both host and target, significantly reducing the effort typically used to generate and prove tests during both phases of development and final verification on target.

“Rigorous standards, such as DO-178C, require independent verification of the code to confirm the code behaves as expected,” noted Ian Hennell, LDRA Operations Director. “With Esterel’s reputation for generating high-quality code and LDRA’s expertise in requirements traceability and verification, customers gain a significant improvement in code quality. By automating this level of code development and verification, much of the error-prone and labor-intensive activity is minimized, ensuring better results.”

With SCADE LifeCycle QTE for LDRA, developers of safety-critical applications now have an automated and complete solution for verification on host and testing on target with the integration of SCADE Suite KCG, SCADE Suite‘s qualifiable code generator, SCADE Suite MTC, SCADE Suite’s model coverage analysis tool, and the LDRA tool suite for target testing. The combined offerings save time and effort throughout the development cycle. With the upcoming adoption of DO-178C by major avionics certification authorities, developers can now benefit from a cohesive development, verification and testing strategy for both model-based and legacy code,” states Eric Bantegnie, president and CEO of Esterel Technologies.

Product Availability

SCADE Lifecycle QTE for LDRA will be available in December 2012.

About Esterel Technologies

Esterel Technologies is the worldwide leader of model-based design, verification and code generation tools for critical systems and software. Esterel Technologies is a privately held company with European headquarters in Elancourt, France, U.S. headquarters in Boston Massachusetts, with direct sales offices in Germany, the United Kingdom, Russia and China. Esterel is supported by channel and service partners worldwide.

For additional information, visit the Esterel Technologies website at: www.esterel-technologies.com.

SCADE, SCADE Suite, SCADE Display and SCADE LifeCycle are registered trademarks of Esterel Technologies. All other trademarks are property of their respective owners.



Contact:

Esterel Technologies
Kara Gremillion, 781-762-4689
Email Contact




Review Article Be the first to review this article

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Blue Pearl: Best kept Secret in EDA
More Editorial  
Jobs
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
FPGA Engineer for Teradyne Inc at San Jose, CA
Analog Hardware Engineer for Teradyne Inc at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Field Application Engineer for Teradyne Inc at San Jose, CA
Upcoming Events
CODES+ISSS 2017, Oct 15-20, 2017, Lotte Hotel, Seoul, South Korea at Lotte Hotel Seoul Korea (North) - Oct 15 - 20, 2017
DVCon 2017 Europe, Oct 16 - 17, 2017, Munich, Germany at Holiday Inn Munich City Centre Munich Germany - Oct 16 - 17, 2017
11th International Symposium on Networks-on-Chip (NOCS 2017) at Seoul Korea (South) - Oct 19 - 20, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise