SiTime’s Programmable MEMS Oscillators ProvideReference Timing for Xilinx’s7 Series Evaluation Kits

Programmable, Rich Feature Set Offers High Performance and Flexibility

SUNNYVALE, Calif. –May22, 2012 – SiTime Corporation, an analog semiconductor company that is revolutionizing the $6 billion timing market with Silicon MEMS solutions, today announced that the Xilinx Virtex®-7 FPGA,Kintex-7 FPGA and Zynq-7000EPP evaluation kits are using SiTime’s programmable high performance MEMS oscillators.

Xilinx uses SiTime’s SiT9102 differential oscillator as the system clock and the SiT8102 oscillatoras the HDMI reference clock on the Virtex-7 FPGA VC707Evaluation Kit and the Kintex-7 FPGA KC705Evaluation Kit. In addition, the Zynq-7000 dual ARM processor evaluation kit uses the same two oscillators plus an additional SiT8103 single-ended oscillator.

“Xilinx is committed to providing our customers with very high performance solutions that are flexible, configurable and accelerate design cycles,” said Steve Logan, analogmarketing manager at Xilinx.“SiTime’s programmable MEMS oscillators offer unmatched flexibility and configurability, which complements our FPGAs. We had great success in using SiTime’s MEMS oscillators on our previous generation kits and are expanding their usage on all our 28nm 7 series development platforms.”

“Xilinx and SiTime are market leaders in their respective fields and we share a common goal – to provide best-in-class programmable solutions that accelerate customers’ design cycles and improve their system reliability,” said Piyush Sevalia, VP of marketing at SiTime. “Our flexible timing solutions deliver unique features and reliability that is ten times better than legacy quartz timing products. This is one more example of how SiTime’s revolutionary MEMS technology and advanced analog design is displacingquartz and driving the electronics industry’s move to MEMS-based timing.”

About the SiT910x and SiT810x oscillators

SiTime oscillators are designed with a programmablearchitecture that offers a wide range of features with fast configurability and ultra short lead-time.The SiT9102 has a differential output withprogrammable LVPECL, LVDS, HCSL and CML signaling levels. The SiT8102 and SiT8103high performance oscillators haveLVCMOS and LVTTL outputs.All devices offer the following features and benefits.

  • Very high frequency stability, 25 PPM over the industrial temperature range
  • Wide operating frequency range (SiT9102 – 1 to 220 MHz; SiT8102 – 1 to 200MHz and SiT8103 – 1 to 110MHz) with 5 decimal places of accuracy to easily program custom frequencies
  • 1.8V, 2.5V or 3.3V operation to support a range of FPGAs/processors and eliminate level translation components
  • Industry standard footprints in 5032 and 7050 packages; plus 2520 and 3225packages for the SiT8102 and SiT8103
  • Outstanding silicon reliability of 500 million hours MTBF (10 times better than quartz)
  • 50,000 g shock and 70 g vibration resistance (10 times better than quartz)
  • All devices are in production and are available with fast lead-time of 3 to 5 weeks


Datasheets

SiT9102: http://www.sitime.com/products/datasheets/sit9102/SiT9102-datasheet.pdf

SiT8102: http://www.sitime.com/products/datasheets/sit8102/SiT8102-datasheet.pdf

SiT8103: http://www.sitime.com/products/datasheets/sit8103/SiT8103-datasheet.pdf


SiTime Partnumbers used on the Xilinx Platforms

SiT9102AI-243N25E200.00000

SiT8102AN-23-25E-12.00000

SiT8103AC-23-18E-33.33333

SiT8103AC-23-25E-66.00000


About Xilinx evaluation boards with SiTime oscillators

Xilinxdevelopment kits provide out-of-the-box design solutions that significantly cut development time and enhance productivity for system designs that demand high-performance and serial connectivity.

About SiTime

SiTime Corporation, an analog semiconductor company, offers MEMS-based silicon timing solutions that replace legacy quartz products. With 80% market share and over 100 million devices shipped, SiTime is driving the $6 Billion timing market’s transition to 100% silicon-based timing.

SiTime’s configurable solutions enable customers to differentiate their products with higher performance, reduced size and better reliability. The rich feature set and flexibility of our solutions allows customers to consolidate their supply-chain, reducing cost of ownership and time to market. By using standard semiconductor processes and high volume plastic packaging, SiTime offers the best availability and shortest lead times in the industry.

Top-tier manufacturers are experiencing these benefits and recognize SiTime as The Smart Timing Choice™.



Contact:

Piyush Sevalia
Vice President, Marketing
SiTime Corporation
Tel.: 408.331.9138
E-mail: Email Contact




Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy