AWR Announces Slate of Activities for IMS 2012

Software Demos in Booth #1514 Include AWR 2011 Product Portfolio, Analyst™ 3D FEM EM Debut; AWR and Partners MicroApps; and Annual Customer Party

EL SEGUNDO, Calif. — (BUSINESS WIRE) — May 15, 2012AWR Corporation, the innovation leader in high-frequency EDA software, once again takes a leadership position at the International Microwave Symposium (IMS) 2012 with a full slate of AWR 2011 software demonstrations, MicroApps presentations and panel, and its renowned Customer Appreciation Party.

IMS 2012 takes place from June 17 to 22 in Montréal, Canada.

Visit AWR at Booth #1514 to see Analyst 2012, AWR’s 3D FEM EM technology for bumps, bond wires, tapered vias and more, as well as the latest release of Microwave Office™, Visual System Simulator™ (VSS), AXIEM® and Analog Office® for MMIC, RFIC, RF PCBs and module design.

AWR software demonstrations:

  • Analyst 2012 debut:
    • 3D FEM EM for bond wires, bumps, balls, ribbons, tapered vias, finite dielectrics
  • AWR 2011 product line including recent additions of:
    • VSS and LabVIEW co-simulation for signal processing, hardware in the loop, and communications standards like LTE and 802.11ac
    • VSS’s Radar Library, Frequency Planner and more
    • Microwave Office/AXIEM and CapeSym for electrical-thermal MMIC co-simulation
    • Microwave Office/AXIEM for PCB verification via ODB++
    • AXIEM’s 3D antenna plots

AWR and its partners will be presenting 11 MicroApps and participating on a panel at the MicroApps Theater (Booth #1223). These talks provide additional insight into novel applications for and technologies within AWR software.

MicroApps schedule:

 

Tuesday, June 19:

12:50 p.m.       Fully Integrating 3D Electromagnetic (EM) Simulation into Circuit Simulation
 

Wednesday, June 20:

9:05 a.m. RF Link Prediction - A New and Novel Approach
10:50 a.m. Linking RF Design through to Test
12:05 p.m.

Panel Session: Device Characterization Methods and Advanced RF/Microwave Design, details are available at http://goo.gl/x2RNw

3:30 p.m. RF System Design -- Moving Beyond a Linear Datasheet
3:35 p.m. Improve Microwave Circuit Design Flow through Passive Model Yield and Sensitivity Analysis
4:35 p.m. Electrical/Thermal Coupled Solutions for Flip Chip Designs
4:50 p.m. System Simulation Featuring Signal Processing Blocks
 

Thursday, June 21:

11:20 a.m. Optimizing the Design and Verification of 4G RF Power Amplifiers
11:35 a.m. Simulating an NXP Doherty Power Amplifier with Digital Pre-Distortion
12:50 p.m. Practical Electromagnetic Modeling of Parallel Plate Capacitors at High Frequency
1:20 p.m. Use of FPGAs for Faster Test Times and Repeatability on Cellular Measurements
1:50 p.m. Mind Your Reference Plane
 

1 | 2  Next Page »



Review Article Be the first to review this article
Aldec Webinar Nov 30

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Computer History Museum: the Future of War is Here
More Editorial  
Jobs
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
REVISED***Director Product Line RF/IC for EDA Careers at San Jose, CA
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
Senior SW Developer for EDA Careers at San Jose, CA
ASIC Design Engineer for Infinera Corp at Sunnyvale, CA
Upcoming Events
“Empowering Leadership with WIT and WISDOM” at SEMI 673 South Milpitas Blvd. Milpitas CA - Nov 28, 2017
Artificial Intelligence and Convolution Neural Networks Discussion at San Jose State University Student Union Theater San Jose CA - Dec 4, 2017
Silicon Valley's Only Comprehensive Embedded Systems Conference at San Jose Convention Center 150 W. San Carlos St. San Jose CA - Dec 5 - 7, 2017
Oski Technology’s Decoding Formal Club Meeting at The Conference Center San Jose CA - Dec 7, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise