Equipment Spending Growth Flat in 2012; Record Fab Equipment Spending Expected for 2013 says SEMI

SAN JOSE, Calif. — March 6, 2012 — Semiconductor fab equipment spending is expected to remain level (0 percent increase) in 2012 according to the latest SEMI World Fab Forecast report.  Eight companies, including Samsung and Intel, will keep their fab equipment spending level above $2 billion in 2012. Fab equipment spending is estimated at $38.85 billion for 2012 and a record $45.50 billion for 2013.

While the outlook for fab equipment spending in 2012 was negative two months ago, key spenders like Samsung increased spending to record levels; Hynix increased spending in 2012 by 23 percent to about US$ 3.75 billion, while UMC increased spending from $1.6 billion to $2.0 billion. In addition, Intel increased spending much more than expected, to a historic high of about $12.5 billion.  If macroeconomic factors improve and other companies adjust their capex plans, then equipment spending for 2012 could even cross into positive territory.

Fab Equipment Spending (new and used)

In US$ Million







including Discretes & LED







Change %







300mm only







Change %







Figure 1: Source: SEMI World Fab Forecast February 28, 2012 edition

The spending trend is expected to continue into 2013 especially for the Foundry, System LSI, MPU and NAND sectors.  Companies continue to invest in upgrades and leading edge technologies, and few are ramping up fab capacity.  SEMI’s latest World Fab Forecast (February 28, 2012) lists 192 facilities with equipment spending in 2012.

2010 was a good year for fab construction but 2011 was even better with a 24 percent increase YoY to $6.4 billion. For 2012, spending on construction is expected to decline by about 28 percent to $4.5 billion. Data of the World Fab Forecast show an even further decline in 2013.

Coming out of the downturn from 2010 on, yearly capacity growth is 5 to 10 percent and is expected to stay modest for the foreseeable future. However, SEMI’s fab data shows rapid increases in fab equipment spending for some segments leading also to an increase in installed capacity.  

While installed capacity for DRAM is expected to level out, Flash capacity is growing rapidly between 2010 and 2013.  The dedicated foundry sector will also undergo growth in installed capacity with the key contributors like TSMC, Globalfoundries and UMC. The recently released SEMI Fab database report enables data analysis by technology node, product type, region, company and fab by fab.

Lower construction spending compared to recent years, especially on new fabs, raises some concern about available capacity beyond 2013.  Overall, the industry has tried to control installed capacity since coming out of the 2009 downturn. Now due to increasing demand, some segments, such as Flash, Foundry, and System LSI, are experiencing a boost in installed capacity.

The SEMI World Fab Forecast uses a bottom-up approach methodology, providing high-level summaries and graphs; and in-depth analyses of capital expenditures, capacities, technology and products by fab. Additionally, the database provides forecasts for the next 18 months by quarter. These tools are invaluable for understanding how the semiconductor manufacturing will look in 2011, 2012 and 2013, and learning more about capex for construction projects, fab equipping, technology levels, and products.  Learn more about the SEMI fab databases at: and

SEMI’s Worldwide Semiconductor Equipment Market Subscription (WWSEMS) data tracks only new equipment for fabs and test and assembly and packaging houses.  The SEMI World Fab Forecast and its related Fab Database reports track any equipment needed to ramp fabs, upgrade technology nodes, and expand or change wafer size, including new equipment, used equipment, or in-house equipment.

About SEMI

SEMI is the global industry association serving the nano- and microelectronics manufacturing supply chains. SEMI member companies are the engine of the future, enabling smarter, faster and more economical products that improve our lives. Since 1970, SEMI has been committed to helping members grow more profitably, create new markets and meet common industry challenges. SEMI maintains offices in Beijing, Bengaluru, Berlin, Brussels, Grenoble, Hsinchu, Moscow, San Jose, Seoul, Shanghai, Singapore, Tokyo, and Washington, D.C. For more information, visit

Association Contacts

Deborah Geiger/SEMI
Tel: 1.408.943.7988
Email: Email Contact

Dan Tracy/SEMI
Tel: 1.408.943.7987
Email: Email Contact

Review Article Be the first to review this article
Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Job Openings: Can EDA Predict the Future
More Editorial  
Technical Support Engineer Germany/UK for EDA Careers at San Jose, CA
Timing Design Engineer(Job Number: 17001757) for Global Foundaries at Santa Clara, CA
Verification Engineer for Ambarella at Santa Clara, CA
Engr, Elec Des 2 for KLA-Tencor at Milpitas, CA
ASIC Design Engineer for Ambarella at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Upcoming Events
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
DVCon 2017 China, April 19, 2017, Parkyard Hotel Shanghai, China at Parkyard Hotel Shanghai Shanghai China - Apr 19, 2017
Zuken Innovation World 2017 at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy