Tanner EDA to Preview HiPer Simulation A/MS and Participate in Panel on Analog Productivity at DATE 2012

MONROVIA, California – March 6, 2012 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated circuits (ICs), will preview HiPer Simulation A/MS and participate in a panel on analog productivity at the Design, Automation and Test in Europe conference ( DATE 2012).  HiPer Simulation A/MS is a mixed-signal electronic design automation (EDA) tool suite that integrates Tanner EDA’s analog design, layout and physical verification tools with third-party logic synthesis and mixed-language VHDL and Verilog simulation. DATE 2012 takes place from 12-16 March in Dresden, Germany.

PANEL:

What: Panel entitled “Analog Productivity – Design and Test of Analog/Mixed Signal ASICs” chaired by Prof. Georges Gielen, Head of Department of Electrical Engineering (ESAT),  Katholieke Universiteit Leuven, Belgium.

Abstract: With analog an ever-important aspect of emerging microelectronic applications, never has the need to improve productivity been more acute. Drawing from a range of industry experts, this panel will highlight and discuss the main areas affecting this field, namely analog/digital co-design, IP reuse, layout automation and design for test/yield.

Who:

  • Jeff Miller, Director of Product Management, Tanner EDA, USA / System-level simulation   
  • Ciaran Whyte, CTO, IC Mask Design Limited, Ireland / Layout acceleration
  • Dr. Holger Haberla, Non-Volatile Memory Design Manager, X-FAB Semiconductor Foundries AG, Germany / IP reuse            
  • Marc Hutner, DFT Architecture Engineering, Teradyne, USA/ Design for test, yield

When: Tuesday, 13 March from 13:15 – 14:15

Where: Exhibition Theatre

DEMONSTRATIONS:

What: Preview of HiPer Simulation A/MS, an integrated solution that gives designers a complete analog design flow from schematic capture, circuit simulation, and waveform probing to physical layout and verification, logic synthesis and mixed VHDL and Verilog simulation. HiPer Simulation A/MS will combine industry-leading technologies into a highly productive design flow for mixed-signal design with industry-leading price-performance.

When:  Tuesday, March 13th through Thursday, March 15th, 2012

Where: Tanner EDA Booth #37

About Tanner EDA

Tanner EDA provides a complete line of software solutions that catalyze innovation for the design, layout and verification of analog and mixed-signal (A/MS) integrated circuits (ICs) and MEMS. Customers are creating breakthrough applications in areas such as power management, displays and imaging, automotive, consumer electronics, life sciences, and RF devices. A low learning curve, high interoperability, and a powerful user interface improve design team productivity and enable a low total cost of ownership (TCO). Capability and performance are matched by low support requirements and high support capability as well as an ecosystem of partners that bring advanced capabilities to A/MS designs.

Founded in 1988, Tanner EDA solutions deliver just the right mixture of features, functionality and usability. The company has shipped over 33,000 licenses of its software to more than 5,000 customers in 67 countries.

 

HiPer Verify and HiPer Silicon are trademarks of Tanner Research, Inc.

All other trademarks and trade names are the property of their respective owners.

 

#          #          #

 

Media Contact :

Linda Marchant, Cayenne Communication, 919-451-0776, Email Contact

 




Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs


Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Technical Support Engineer for EDA Careers at Freemont, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
Verific: SystemVerilog & VHDL Parsers
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy