X-Rays, the Latest Tool in 'Green' Manufacturing

LOS ANGELES, Jan. 20, 2012 — (PRNewswire) —  Environmental concerns are increasingly shared by responsible manufacturers around the world. In the U.S., National Wire & Cable is an example of a company who takes the commitment to "Green" manufacturing seriously. The company has implemented sophisticated X-Ray Fluorescence (XRF) technology to ensure its products comply with all applicable International lead-free, Green and REACH manufacturing standards.

X-Ray fluorescence is a phenomenon in which a material is exposed to x-rays of energy and atoms in the sample absorb the energy. If the energy is high enough, a core electron is ejected from an atom in the sample. To fill the void left by the ejected electron, a different electron will take its place. This change in position gives off energy that is specific to its element. This energy can be detected and analyzed by the XRF device.

The power of XRF analysis was first realized by Henry Moseley in 1912. Moseley found that it was possible to excite a sample and gather information from the x-rays being emitted. X-ray fluorescence is a proven technique for elemental analysis of materials. Since its early beginnings, the field of XRF has blossomed into one of the most important materials analysis tools of the 21st century.

The metal alloys and plastics used to make wire and cable can create an environmental or health safety issue. Coating materials, for example, are often specified to very exacting formulas and can come from any number of foreign and domestic sources. By using XRF technology to analyze a material's precise chemical composition a manufacturer can certify that the materials it uses are compliant with all health and safety standards. This level of quality checks and certification is much more reliable than taking a supplier's word that the materials are "OK."

National Wire employs a Nitron XL3 hand-held XRF analyzer, which is capable of providing legally admissible detailed chemical materials analysis in real time. XRF analysis is used for systematic verification throughout National Wire's manufacturing process including receipt of material, stockroom and finished product. A streamlined record retention process supports the compliance assurance system and dramatically speeds the time to respond to compliance questions.

The 60-year-old employee-owned company is one of the largest manufacturers of wire and cable products in North America. Their wire and cable can be found on everything from the defibrillators used in hospital emergency rooms to a Disneyland theme park ride. "We are very mindful of the large footprint our products occupy throughout America and the world," said National Wire Vice President Vic Alfonsi. "We are demonstrating that manufacturing in an environmentally responsible way is good business."

Images:

http://www.ereleases.com/pic/2012-Niton-XL3.jpg
http://www.ereleases.com/pic/2012-XRF-Testing.jpg

PDF: http://www.ereleases.com/pic/How-XRF-Works.pdf

National Cable Molding
136 San Fernando Road
Los Angeles, CA 90031

Contact: Vic Alfonsi
323-225-5611
Email Contact   

This press release was issued through eReleases(R).  For more information, visit eReleases Press Release Distribution at http://www.ereleases.com.

SOURCE National Wire & Cable

Contact:
National Wire & Cable




Review Article Be the first to review this article
Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Qualcomm’s Lu Dai: Energetic leadership for Accellera
More Editorial  
Jobs
SOC Logic Design Engineer for Global Foundaries at Santa Clara, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Sr. Staff Design SSD ASIC Engineer for Toshiba America Electronic Components. Inc. at San Jose, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Principal Engineer FPGA Design for Intevac at Santa Clara, CA
Upcoming Events
IoT Summit 2017 at Great America ballroom, Santa Clara Convention Center Santa Clara CA - Mar 16 - 17, 2017
SNUG Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Mar 22 - 23, 2017
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy