University of Maryland Creates Human-Powered Helicopter with SolidWorks

Relies on SolidWorks Simulation Software to Ensure Flight Worthiness, Safety

CONCORD, Mass. — (BUSINESS WIRE) — November 8, 2011 — We think nothing of flight today and even take it for granted. It’s not unusual to see a helicopter give a scenic tour or provide a traffic report with “eyes in the sky” for television news. With software from Dassault Systèmes SolidWorks Corp., the Aerospace Engineering department at the University of Maryland’s (UMD) A James Clark School of Engineering is taking flight one step further.

The UMD design team is pursuing a different type of flight: a human-powered helicopter, which runs on energy generated by pedals. While human-powered airplanes have been around for at least a quarter of a century, human-powered helicopters pose a much bigger challenge, as they need more power for flight height and duration. For example, a 60-second flight pushes the limits of human endurance.

To address this issue, the design team turned to DS SolidWorks. Using SolidWorks® CAD software, the team created a helicopter propelled by hand and foot pedals. Not only does the design need to be aerodynamic, but it required durable, lightweight materials.

“SolidWorks has been critical to designing the complex parts this helicopter requires,” said Joseph Schmaus, a UMD graduate student working on the project. “Between the simulation capabilities, which allow us to perform stress analysis on individual components, and the ability to rapidly prototype complex parts, SolidWorks has helped us to ensure we create effective, safe, lightweight pieces for the larger design.”

The helicopter prototype—which weighs only 100 pounds—is currently operational, and has broken two world records to date, according to the Fédération Aéronautique Internationale (FAI), the world governing body for air sports, aeronautics and astronautics world records. The first UMD flight was recorded at four seconds and the second flight at 12.4 seconds. The UMD team hopes to achieve the benchmark set for the Sikorsky prize, which requires a flight duration of 60 seconds and a height of three meters.

“We applaud UMD’s accomplishments to date,” said Marie Planchard, Director of World Education Markets for Dassault Systèmes SolidWorks. “This is a cutting-edge design, and coupling the power of human endurance with the right materials positions the design team to continue setting and breaking records. We wish the aerospace engineering department the best of luck with this mission—and we’re proud to be on board.”

For images of the helicopter design project, please visit: Images courtesy of Brandon Bush.

About Dassault Systèmes SolidWorks Corp.

Dassault Systèmes SolidWorks Corp., a Dassault Systèmes S.A. subsidiary, is a world leader in 3D solutions that help millions of engineers and designers succeed through innovation. Our products deliver an intuitive experience in product design, simulation, publishing, data management, and environmental impact assessment. For the latest news, information, or an online demonstration, visit our Web site ( or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).

SolidWorks is a registered trademark of Dassault Systèmes SolidWorks Corporation in the US and other countries. Other brand and product names are trademarks of their respective owners. © 2011 Dassault Systèmes SolidWorks Corp.


Dassault Systèmes SolidWorks Corp.
Kristen Wilson, +1 978-318-5245
Email Contact
SHIFT Communications
Mike Fearon, +1 617-779-1807
Email Contact

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Sr. staff ASIC Design Engineer -2433 for Microchip at San Jose, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
SENIOR ASIC Design Engineer for TiBit Communications at Petaluma, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy