Mentor Graphics Delivers Emulation Solutions for the Verification of USB SuperSpeed (3.0) Products

WILSONVILLE, Ore. — (BUSINESS WIRE) — October 25, 2011Mentor Graphics Corp. (NASDAQ: MENT), a leader in high-performance system verification solutions, today announced hardware and software solutions to accelerate the verification of Universal Serial Bus (USB) SuperSpeed (3.0) products. These new solutions, connected to a Veloce® emulator, enable designers to test their USB SuperSpeed peripheral devices integrated on their System-on-Chip (SoC) designs, and to develop and test their software drivers and firmware prior to silicon being available.

The first of two new products is the iSolveTM USB SuperSpeed (3.0) Host Controller, which has a ‘plug-and-play’ hardware interface to the Veloce family of hardware emulators, providing a cost-effective and efficient solution to verify USB SuperSpeed peripherals that are part of an SoC design. This new solution adds to the existing iSolve family of solutions for the accelerated verification of applications such as multimedia, networking, embedded systems, wireless, and storage devices.

Complementing the iSolve solution is a new Veloce USB 3.0 Host Transactor, which delivers an accelerated simulation environment for the verification of USB SuperSpeed (3.0)-compliant devices. It generates the appropriate stimuli for the DUT, passing packets (or transactions) of protocol data for tests. The transactor also provides high-level Application Programming Interface (API) and example tests to model a test environment that can exercise the emulated USB SuperSpeed (3.0) device.

USB is a pervasive technology across a wide range of products, with billions of devices having been created that use the protocol. With the ever increasing demands for system-level verification of such products, a heavy burden is placed on SoC designers who need to verify how their USB SuperSpeed devices interact with the software and hardware in their SoCs.

“New computer and consumer products are increasingly dependent upon the use of the latest-generation USB SuperSpeed peripheral devices, and design engineers are concerned with the quick and efficient verification of software drivers and achieving compliancy testing with an SoC having one or more USB SuperSpeed ports,” said Jim Kenney, director of marketing, Mentor’s Emulation Division. “To solve these challenges, we created both hardware and software solutions for USB SuperSpeed verification, providing more flexibility, ease-of-use, and configurable test models our customers require for pre-silicon testing.”

Combined with the Veloce platform, the USB SuperSpeed solutions deliver high-performance, and easy-to-use system verification environments to develop new SoCs containing a USB SuperSpeed peripheral device, without compromising delivery schedules. The solution offers several key benefits:

  • Industry-standard xHCI controller provides connection to Windows or Linux-based software environment for driver development
  • Standard USB SuperSpeed (3.0) PIPE interface to the emulated design in Veloce
  • Transactor solution that provide built-in SystemVerilog/OVM compliancy sequences used to check emulated USB SuperSpeed device compliancy to the protocol standard
  • Compliant to USB SuperSpeed (3.0) standard

The new USB SuperSpeed products can be used with traditional in-circuit emulation (ICE) as well as a high-performance, transaction-based acceleration modes of operation. The ability to mix and match traditional ICE capabilities with high-performance, transaction-based acceleration facilitates the smooth transition from a simulation-centric use model to in-circuit emulation. The solution is available for deployment at customer sites effective immediately.

For product information on the Mentor® network verification platform, contact your Mentor Graphics® sales representative, call 800-547-3000, or visit the website at

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues over the last 12 months of about $915 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site:

(Mentor Graphics, Mentor and Veloce are registered trademarks and iSolve is a trademark of Mentor Graphics Corporation. All other company and/or product names are the trademarks and/or registered trademarks of their respective owners.)


Mentor Graphics
Carole Dunn, 503-685-4716
Email Contact
Ry Schwark, 503-685-1660
Email Contact

Review Article Be the first to review this article
CST Webinar Series


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
SENIOR ASIC Design Engineer for TiBit Communications at Petaluma, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy