Duolog and Cadence to Validate Interoperability from TLM Virtual Prototype through RTL Assembly

DUBLIN, Ireland, October 24th 2011 - Duolog Technologies, the award-winning developer of IP and SoC integration products, is collaborating with Cadence Design Systems to validate system development flows from open, connected, and scalable virtual system prototyping connected to RTL SoC assembly. The validated flow connects the Duolog industry-proven integration applications, Socrates, and the Cadence System Development Suite. To further support this flow, Duolog is extending its relationship with Cadence by joining the Cadence System Realization Alliance.

“At Duolog, we recognize that a comprehensive data management solution is essential for complex IP-based SoC assembly,” said Norman Walsh, Chief Operating Officer at Duolog Technologies.  “The Cadence System Development Suite provides the key connections between our products to improve team productivity, and extend into the vitally important area of software development.  The collaboration between Cadence and Duolog harnesses the power of our industry-leading Socrates tool suite.” 

“Interoperability with IP-based SoC assembly solutions is an important requirement for improving productivity of system development by enabling earlier software development and rapid system assembly,” said Michal Siwinski, Product Management Group Director, System & Software Realization Group, Cadence. “By collaborating with Duolog, we are providing a solution that is open, connected and scalable—essential criteria for developing complex systems in today’s application-driven technology environment.”

The Cadence System Development Suite provides four connected platforms that enable hardware-software co-design from early software development through to prototyping, while Duolog’s Socrates manages the assembly of the vital infrastructures of these systems. Socrates assembles the virtual systems, and maintains a consistent HW/SW interface between the virtual and real systems. TLM2.0-based IP can be quickly and easily integrated into virtual systems using the rules-based integration methodology at the heart of Socrates.

Duolog is attending ARM TechCon in Santa Clara, California on October 25th (booth #25) to demonstrate their suite of award-winning IP and SoC integration tools.

About Duolog Technologies: Duolog Technologies is a leading developer of EDA tools that address the increasingly complex challenges of IP integration.  We enable our customers to deliver integrated systems more quickly and cost effectively than their competitors.  Our innovative products and solutions allow for maximum productivity and control throughout the entire SoC lifecycle.  


For further information on Duolog, please contact:
Sally Kenny
+353-91-730 879
Email Contact 

http://www.duolog.com



Read the complete story ...


Review Article Be the first to review this article
CST: Webinar October 19, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Analog Hardware Engineer for Teradyne Inc at San Jose, CA
Field Application Engineer for Teradyne Inc at San Jose, CA
FPGA Engineer for Teradyne Inc at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Upcoming Events
15th IEEE/ACM ESTIMedia 2017 at Seoul Korea (South) - Oct 19 - 20, 2017
11th International Symposium on Networks-on-Chip (NOCS 2017) at Seoul Korea (South) - Oct 19 - 20, 2017
ESTIMedia 2017 at Seoul Korea (South) - Oct 19 - 20, 2017
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise