CST Webinar: Predicting Radiated Emissions from Electronics, Oct. 6

This webcast will discuss powerful new workflows for reliably predicting radiated emissions from electronics systems. We start by importing a complex PCB model into CST PCB STUDIO and applying new EMC rules checking algorithms to rapidly identify potential weaknesses in the design. Critical nets, planes and vias are then analyzed to determine the differential mode (DM) to common mode (CM) conversion caused by driver skew and line imbalance. Finally, the resulting transient noise waveforms are injected into a 3D model of the connector/cable assembly and radiated emissions predicted. Important features of a typical anechoic chamber test are represented in the model using external ground plane reflections and cylindrical scanning to detect the peak emissions.

Please join us on 
October 6 at 11.30 AM Eastern Time, 8.30 AM Pacific Time for a 45 minute web presentation and Q&A.

Full details and registration here:



This webinar is part of a series. The series is organized in tracks dedicated to the use of 3D EM simulation in various application areas such as EDA or EMC/EMI.

Full information on the individual webinars can be found at:
<
www.cst.com/webinars>

 




Review Article Be the first to review this article
Aldec

Featured Video
Jobs
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Upcoming Events
IPC Technical Education - PCB Layout - Place and Route at Del Mar Fairgrounds 2260 Jimmy Durante Blvd. Del Mar CA - May 2, 2018
IPC Technical Education at Wisconsin Center 400 W Wisconsin Ave. Milwaukee WI - May 8, 2018
IPC High Reliability Forum at Embassy Suites: Baltimore-At BWI Airport 1300 Concourse Drive Linthicum MD - May 15 - 17, 2018
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise